Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Rampage IV Extreme PCI 3.0??

Hi, does anyone know tell me because this motherboard supports PCI 3.0 but all the LGA 2011 (except the new cpu Ivy bridge-e) doesn't work in 3.0, but 2.0.So why do the pci 3.0?My pcu is Intel i7 3970x, vga EVGA gtx 680 Classfied.Thanks

Davide by Level 7
  • 14755 Views
  • 18 replies
  • 0 kudos

Asus Rampage III Extreme - Board water block test/review

Hi everyone, wanted to bring the content of the review published on our website over to the ROG home. It is a lengthy article, so take your time and feel free to reference as you get ready to get your board wet (in the good way :))IntroAs a proud own...

Retired by Not applicable
  • 32548 Views
  • 10 replies
  • 0 kudos

PCI-e Combo II Wifi driver/mobo issue

So I just got all my parts yesterday, and went through to setup everything up. Here's what I'm working with.Maximus VI Extremei7 4770kNoctua NH-D14Corsair Dominator Platinum 2133 MHz (2x8GB)XFX 5830s in crossfireRosewill 1000w Thermaltake Level 10 G...

86boy by Level 7
  • 5737 Views
  • 4 replies
  • 0 kudos

New build having issues with keyboard and internet

HiJust recently got my new build together and are experiencing a few odd problems.First, sometimes when I boot my PC my Logitech G19 keyboard doesnt respond and only way to fix it is either unplug the usb (hassle since its under the desk) or a reboot...

Jimirix by Level 7
  • 6816 Views
  • 11 replies
  • 0 kudos

Maximus Hero - Event Viewer Error/Warning related to AMDA00

Hello all,Every time i boot my PC, I receive a Warning in the error log that states The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&1. A while back, I had an unknown device under the device manager called ACPI\PNP0A0A. ...

draynh33 by Level 7
  • 15945 Views
  • 4 replies
  • 0 kudos

Problem flashing bios 4102 and 4206

Hi people, A little help please.Twice I tried to flash both the bios 4102 and 4206 8 in bios cip 1) and both times after a reboot, gave a double boots with the messages updating UEFI-1 and UEFI-2.... but after the complete setup of the new bios, the...

sandro_c by Level 12
  • 17373 Views
  • 36 replies
  • 0 kudos

Rampage IV Extreme - Boot Problem

Hello all,I have a problem during boot-up with my Rampage Iv Extreme. The boot-up sequence freezes and stops. The LED counter on the board reads 67 (CPU DXE initialization is started). It stops there and doesn't continue. I have to turn everythin...

benmin by Level 7
  • 5473 Views
  • 8 replies
  • 0 kudos

Problems installing A1 suite.

HiAfter following the clean up and install instructions I too am unable to install the upgraded A1 suite, I did have the original A1 from disk installed.I am getting a window "you must reboot this system to complete a previous installation. After reb...

Bodmech by Level 7
  • 3647 Views
  • 4 replies
  • 0 kudos