Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

AMD AHCI vs MS AHCI - SSD Testing

I thought I would share some of my testing results using both the latest AMD AHCI (amd_sata.sys: 1.2.1.292) and MS AHCI (msahci.sys: 6.1.7601.17514 win7-sp1) drivers with my Plextor 128GB SSD drive (PX-128M2S). The results are that the MSAHCI driver...

7761 7762 7763 7764
RangerXP by Level 8
  • 155396 Views
  • 36 replies
  • 4 kudos

RIVE - Booting to W7 Safe Mode

Quick query guys, my previous X58 Evga Classified mobo allowed to bott into W7 Safe Mode by simply tapping F8 while in initial Boot sequence....during BIOS Flash Screen.I cannot seem to boot into Safe mode with this RIVE, ever since I put this rig to...

rjbarker by Level 11
  • 14008 Views
  • 17 replies
  • 0 kudos

Water Cooling Software Problem

Hello all. I've spent the past three days and nights trying to fix a problem I've been having. I've searched just about everywhere on the net for answers, to no avail, and the customer support has not even replied to my E-mail.I have an ASUS Maximus ...

Aured by Level 7
  • 8275 Views
  • 8 replies
  • 0 kudos

Crosshair v Formula-z Fails POST

I'm building a new system, see specs in signature and I'm running into a problem. Initial install is ok, and has been running fine for the past couple days.But now I cannot get the system to pass POST. Basic behavior, power on system, all fans (case,...

Sudden memory problems :( Q code 59

Hi, I'm hoping someone might be able to help narrow down the root of this problem. I'm pulling my hair out hereTwo days ago I was happily running 4 x 4GB Crucial Ballistix Tactical Tracer 1866Mhz on my ASUS Maximus Gene V using it's XMP profile.I cam...

1.1xx volt possible with Offset or Adaptive mode?

i am wondering if there is a way to see 1.1xx volt while using offset or adaptive mode bcs everytime i use that and just do a little voltage in Aida64 4.00 and CPU-Z 1.67.1 x64 jumps up to over 1.2xx and don't come down and i know i can bench at 4ghz...

00 Q Code and CPU Led after RMA

I got back my motherboard after it being repaired. I tried to test boot it but I only got a 00 Q code and a red CPU led. My CPU was working before and I checked that the socket pins were not bent. Do I try to RMA again?

Sabertooth 990fx r2.0 sata issues

Hi i`m a new on this forum and i have a hope u can help me. One week ago in saturday i wanted turn on my PC and there was no boot for win7. I checked BIOS and i saw there is no SSD and HDD in boot sequence. I checked everything cables, psu and all wo...

amon777 by Level 7
  • 27626 Views
  • 7 replies
  • 0 kudos

New ASmedia rom 3.02

Hi Guys,This just turned up on Station-Drivers - ( http://station-drivers.com/download/asmedia/asmedia_asm106x_106N302(www.station-drivers.com).exe )I had a quick look at MMtool but there are multiple 1061 entries, so not as simple as the Intel RST3A...

Graphics Card running at x8 instead of x16

Hello,I just installed this card "http://www.asus.com/Graphics_Cards/GT640DCSL2GD3/#support_Download" and in BIOS as well as Windows (GPU-Z) it reads as running at PCIe-3.0 x8 Native... i understand that there is no performance loss in itself but sti...