Driver for R4BE
HelloIn the device manager, I have a unknown device ACPI \ PNP0A0A Someone can tell me is what driver?Thanks
HelloIn the device manager, I have a unknown device ACPI \ PNP0A0A Someone can tell me is what driver?Thanks
Hi i just put together my PC, tried to run windows update and got the; windows update cannot currently check for updates because the service is not running, you may need to restart your pc. Sense i just built it i went ahead and reformated it thinki...
Hey, first off sorry if this has been asked before, I did search with no luck. I have a Maximus VI Formula, and there is about 20 second delay after the BIOS Screen to the starting windows Screen. I get a black screen with a cursor, blinks 3 times...
I had a power failure the other day when my power lines went down. Unfortunately, the power line never snapped so it still delivered fluctuating power to my home. During this time my RIVE restarted twice. Now I cannot get my RIVE to POST. It displays...
I have my 4930k at 36 multi, sync all cores. This gives an exact 4.5 o/c at 1.385 in bios.XMP is set to profile 2, bclk strap goes to 125, no problem. 16 gbs gskill 2666Speedstep is off, all cstates are off, min proc power is 100% in power options in...
Hi guysI'm having a problem with my i7 4770k, i can only get it stable at 42 and i can't go further it crashes also to get 42 ration an all cores i had to put a voltage of 1.25 v which i think it's too much for a 42 ration so can't have some tips on ...
So i finally found the problem why my board would no longer boot it would just power on for a second then off in a loop, It seems to be the water block screws doing it if there loose it boots every time, I even tried doing them up a bit but got rando...
Hi, I bought this card believing that I should be able to eufi off the card after creating the array.However when Widows setup creates the partitions it states that it cannot boot from this drive.I go back into the bios and noticed that the array is ...
First off, this is my build, minus the custom water cooling loop:http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=29656447This is my wife's build, if that's relevant:http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishLi...
Both the GPU's support PCI-E 3.0, my processor is 4930k. I'm using the latest BIOS I could get. They are 2 Nvidia GTX 670's. I don't know why they are showing up as PCI-E 2.0. In the BIOS I have it set to gen3, and still continues to show up as gen2 ...