Hello as you can see from the pic attached i have OC'd my cpu to 4.4 ghz i changed to voltage to 1.38 (which is what it hits under load)is 1.38 volts safe? i have ran intel burn test on very high for almost an hour and temps where never more than 40 ...
My rig recently started to act out of place. I have been getting constant lock ups that required me to force shut down.it go to the point that it does not want to boot up. I thought originally it was the psu. But I checked it on another computer and ...
Hi, I have a MB Maximus V Formula, I just turn on my pc, and the screen is black, I have this build for 6 months. The QCode displayed is 20, I search around the internet and couldnt find anything real important.My Config:Maximus V FormulaIntel core i...
Can anyone tell me why amd boards are being discriminated against when it comes to the new ROG front panel controller. I know it was designed after the crosshair V came out, but why was it designed to be used on intel boards only. I was really looki...
Hi all. Hope this isn't a silly question but the white 2m long USB cable that's supplied with the MB for use with Rog Connect for monitoring on another PC, is that in normal USB fashion and can I use a longer USB cable??Cheers MB= Maximus 4 Extreme Z
Hello and sorry for my bad english.Since i put a 280X Vapor-X in my system (in crossfire with a 7970 Vapor-X)my PC sometimes wont boot showing the "b2" error... Monitor shows "no signal".When it boots after 20-50 trys the PC runns perfectly, without ...
Hello Everyone,I was planning to upgrade my RAM but i have a doubt and was hoping some one can help me out.Currently i have 8GB of memory(Corsair Vengeance DDR3 4 GB x 2)Is it possible to add another 8GB stick into one DIM slot? or should i do 2x4GB ...
Hi everyone! Hope I posted this in the right place!I have been having issues with my first ever build. Below are the specs:CPU: Intel Core i7 4770K 3.5GHz Socket 1150 Motherboard: Asus Z87-ProChassis: BitFenix Merc AlphaHDD: WD Blue WD10EZEX 64MB 1TB...
Hi all, hope someone can assist.Just had a new ROG VI HERO replacement motherboard arrive today after the temporary Gigabyte Z87MX-D3H would not do x8 x8 Crossfire. So that went RMA. I need to run the existing install of Windows 7 (from the Gigabyte)...
I've RIVEB i'm try to run 4930K at 4.5 Ghz on the motherboard i set 1.355 (high eh) but this is what i can do for run 4.5 GHZAnyways, the question is if i set 1.355v why in windows display at 1.360-1392 in idle and when is under load display at 1.32...
