Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Latency Boundary

Hi, allIn your experience, what is a good starting value for the Latency Boundary settings in M6F BIOS for DDR3-2400 DRAM?http://rog.asus.com/254052013/maximus-motherboards/recommended-settings-for-overclocking-maximus-vi-motherboards/ doesn't dis...

jab383 by Level 13
  • 3700 Views
  • 2 replies
  • 0 kudos

ek waterblock question

I've searched all over Google for the last few hours and cannot find a solid answer:I just received the EK waterblock for the C5f - z, and the directions say to cut the thermal pads to size and apply them. It also says to add a bit of thermal compoun...

Pendy by Level 7
  • 6036 Views
  • 10 replies
  • 8 kudos

Some problems with Win8 + Maximus VI Formula

Hey guys,Did an upgrade on my computer, installed everything, Maximus VI Formula motherboard, Intel CPU i7 4770 Socket 1150 Haswell Processor, used my SSD drive from previous windows 8 installation. I am doing a fresh install of windows 8 but the fir...

X79 Sabertooth WC board

Has anyone tried to WC thier sabertooth board, saw that XSPC make a kit for a Rampage 4 Black and was wondering if it will fit. Thanks

tracti by Level 7
  • 2123 Views
  • 2 replies
  • 0 kudos

2 questions regarding fans and pcie slot

Hey!I am in the process of putting together a new system and ran into 2 problems.My board is the Maximus VI Extreme.1.) The system is using a single watercooled 780ti with a backplate. The card will not fit into the first pcie slot due to the backpla...

Folex by Level 7
  • 1544 Views
  • 0 replies
  • 0 kudos

Crosshair V Formula & AMD FX-8150 CPU Overclocking Guide

http://rog.asus.com/81732012/guides/crosshair-v-formula-amd-fx-8150-cpu-overclocking-guide/AMD FX CPUs overclock well if you know the right settings, and the CrossHair V Formula motherboard is ROG’s 5th Gen AMD hardware, so the team behind it has ple...

X-ROG by Level 15
  • 49803 Views
  • 14 replies
  • 0 kudos

BIOS update

Should I update bios 1302? I have the new build up, new build bugs worked out. Three sleeved commercial cables from a well known retailer bad, one with a bad 24 pin connection, 1 fan extension does not supply voltage and a molex extension with the ...

Rampage IV Black Overclock freeze help

I'm using Rampage IV Black with latest bios and soon as i OC the computer freeze.I'm using the muliplier and have raised the vtt volt all way to 1,40 but doesn't help.Raja cured the shutdown problem for me by having set the current inrush inertia to ...

nerius by Level 7
  • 7760 Views
  • 21 replies
  • 0 kudos