Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Rampage 4 no sound

Hello, i have a big problem with the onboard sound on r4e. I recently instaled W7 and even after a re install of audio driver when i open the control panel, and search for speakers apears in off. And i can t get any sound at all. Is the sound card da...

Puppet37 by Level 7
  • 9874 Views
  • 13 replies
  • 0 kudos

Problems getting through POST,

I was up and gaming and everything locked up, soft reset and I get nothing but what's in the video and shut down. I've read around, I've removed and switch my ram around, cleared cmos, removed video cards. Looking into completely removing power and h...

Maximus Hero 8.1 64 Bit Install Problem

I might be missing something very obvious but all attempts to load Windows 8.1 64 Bit do not get past the initial Logo and splash screen.I can install 32 Bit with no issues onto the SSD and everything is as it should be yet attempting the same proces...

redrx7 by Level 7
  • 1587 Views
  • 0 replies
  • 0 kudos

Maximus VI Hero BSOD 0xf4

I have had a rather strange, and frustrating problem with my ASUS Maximus VI Hero board. I occasionally would get a BSOD (BlueScreen of Death) with an error code of 0xf4. The BSOD occurres when I insert or extract a USB flash drive into either the re...

Latency Boundary

Hi, allIn your experience, what is a good starting value for the Latency Boundary settings in M6F BIOS for DDR3-2400 DRAM?http://rog.asus.com/254052013/maximus-motherboards/recommended-settings-for-overclocking-maximus-vi-motherboards/ doesn't dis...

jab383 by Level 13
  • 3578 Views
  • 2 replies
  • 0 kudos

ek waterblock question

I've searched all over Google for the last few hours and cannot find a solid answer:I just received the EK waterblock for the C5f - z, and the directions say to cut the thermal pads to size and apply them. It also says to add a bit of thermal compoun...

Pendy by Level 7
  • 5776 Views
  • 10 replies
  • 8 kudos

Some problems with Win8 + Maximus VI Formula

Hey guys,Did an upgrade on my computer, installed everything, Maximus VI Formula motherboard, Intel CPU i7 4770 Socket 1150 Haswell Processor, used my SSD drive from previous windows 8 installation. I am doing a fresh install of windows 8 but the fir...

X79 Sabertooth WC board

Has anyone tried to WC thier sabertooth board, saw that XSPC make a kit for a Rampage 4 Black and was wondering if it will fit. Thanks

tracti by Level 7
  • 2019 Views
  • 2 replies
  • 0 kudos