Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

software compatibility (aida64 and ai suite 3)

I am not sure where to post this but since new MB have new software here it isI just want to know if there are conflicts between the two? already installed ai suite 3 but i want to install aida64 at the same time for monitoring purposes like CPU mete...

Bott With any key pressed.

Hello, Last 2 weeks i got this MB. Rampage IV Black Edition (Completely New)I have studied about the configurations, anyways i got a Little problema. When i turn off the MB (from bios) then i press any key, the system turns on again. I have a PS2 key...

Max2014 by Level 7
  • 2097 Views
  • 1 replies
  • 0 kudos

R III Gene/Windows 8.1/Bios Flash

MY M6F board is being set out for an RMA, so I installed my old Rampage III Gene board and chip in my computer, its running Windows 8.1. I have 12 GB ram installed but W8 is only showing 8GB, I have done the switching, using 2 or 3 sticks But it is s...

CPU LED, 00 Q-Code, about done with Asus boards

So, finally got in my new components (see other threads) as shown in my signature. Hook everything up, hit power, NOTHING! 00 Q-code, CPU LED lit red. I am beyond frustrated at this point, and so far past the due date to have this computer running I ...

Asus Maximus VI Hero C2 Q-code 00. System didn't boot up

HelloThe system it's in use for about 2 months.Today didn't boot up and i have error code 00. Also i must mentioned that the 2 case fans that are connected directly in the motherboard did'nt work. I try to connect the rear case fan on the cpu opt and...

Maximus 6 formula - tv issue

Hi all,First post here and hopefully you guys can help me out.Here's my set upLG 32LN5700 (smart led TV)Maximus VI formulaPowerColor r9-290 PCS+ (connected via hdmi-hdmi)i7 4770KSamsung ddr3 12800 8g x2English is not my native language, hope you unde...

Supports 8 gb ram memories

a favor, I need to know if the memories RAM 8 gb the board supports it crosshair v formula, but not z, which recommend me, with good latency and speed, the 1866 mhz reference seems well you are saying,:)

Oc panel temp2 bug

hello, I'm having problems with reading temp2 oc panel extreme mod.T2 is fixed at 199.0 ° C no matter what I doT1 is normaltested several K probes

C0NN0R by Level 7
  • 1772 Views
  • 0 replies
  • 0 kudos