Help
Other Motherboards
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

Code C0 on Rive ....

My PC has been off for a week and on power up now it gets to code C0 and stops .... Have removed ram, video cards and all case wires so only has CPU installed. Still gives C0 .. Have reset bios, removed battery, no change. Any ideas ? It was fine whe...

Zangzub by • Level 7
  • 3288 Views
  • 3 replies
  • 0 kudos

R4BE Vcore not dynamic

Hello, is there a way to prevent it in the bios vcore is dynamic but static? I do not use the vcore off-set, However, controlling cpu-z vcore and dynamicsorry for my english

AI3 Showing Wrong BCLK Frequency

I have a Maximus VI Extreme and after upgrading to Windows 8.1, I also updated all the ASUS drivers and software including AI suite 3 .Now AI Suite 3 shows the wrong BCLK frequency. The BCLK should be 100 but it shows 80. Previously it would show the...

Hero Locking up

After months of trying to troubleshoot this locking up, I still can't find what the cause is. I have replaced memory I have replaced the PUSI have replaced the GUPI have new SSD Even replace the PUS cablesMy next guess would be the board or the CPU....

ewind by • Level 10
  • 1884 Views
  • 1 replies
  • 0 kudos

Maximus V Extreme sticky i/o back buttons

HelloAfter a brief struggle fitting the little wires on the wifi card and feeding the aerial cable through the i/o panel i finally got the maximus v extreme motherboard fitted in my obsidian 750d case . All was ok until i noticed that when pressed ...

aeneon by • Level 7
  • 2673 Views
  • 2 replies
  • 0 kudos

Offset vs Manual voltage setting

Hey guys, I don't understand the difference between these two settings. What are the advantages of one verses the other?My 8350 is currently at 4.92 ghz 1.47v, llc set to ultra high ( 1.488v) all set manully.

Labels