Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Router turning on computer problem

I'm having a problem with my impact motherboard. It seems my router is turning it on after I have shut it down. The problem disappears if I turn the router off. It seems to do it randomly on different hour marks. I have disabled wake on lan within th...

Realist by Level 7
  • 3267 Views
  • 6 replies
  • 0 kudos

Hero Locking up

After months of trying to troubleshoot this locking up, I still can't find what the cause is. I have replaced memory I have replaced the PUSI have replaced the GUPI have new SSD Even replace the PUS cablesMy next guess would be the board or the CPU....

ewind by Level 10
  • 2673 Views
  • 5 replies
  • 0 kudos

CPU_OPT cannot be detected by software

i have a (3) 4-PIN fans connected to the Mobo's "CPU_FAN, CPU_OPT and CHA_FAN3".bios detects all fans, but my software only displays 2This is the BIOS which detects 3 fansmy CPUID HWmonitor only displays 2im really not knowledgeable in these things, ...

Not posting with a 00 code on a Rampage IV Extreme

Since last summer my computer has been running awesomely. This all came to a screeching halt the last month when I re installed my windows 7 professional to get rid of some junk, although I mistakenly installed a 32 bit version instead of the 64 bit ...

22161

Computer Hard locking

Not sure what to do. Recently my computer has started to hard lock anytime I am playing a game for longer than 10 mins. I have done everything I could possibly think to find the problem and am at my wit's end. I have tested for virus, run memory c...

CvFZ shutdown after 3 sec.

Hy now with my owen thread.My Problem is when is start my PC it shuts down after 3sec.So than i do a Clear cmos reload my stored profil and than it woks fine. CPU 8350 @ 4000 1,275V Mobo: Crosshair V Formula Z RAM G Skill F3-2400C9-4GTXD 2*4GB (runs ...

Bought R4G CPU+DRAM LED red with 4960X

I just bought a Rampage Gene IV, installed the 4960X and RAM and GPU. When I turn it on i get debug code 00 and CPU and DRAM LEDs are lit red instantly.I understand that its possible the BIOS is too old to support the CPU, but ive been unsuccessful i...

New BIOS for the Sabertooth Z87

Has anyone flashed to this bios 1707 yet? I go by the modo if it isn't broken don't mess with it.My system runs perfect on 1603. I have updated all the drivers that has new updates.Thanks.

Shutdowns on Crosshair V Formula Z

Hi guys, I am slightly stumped by this fault and wonder if I could pick your brains. I built this system for my son but can't pass it over to him until this is sorted. Specs:CPU: FX 8320Mobo: Crosshair V Formula Z BIOS 1602 (the latest one)RAM: G-...