Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Trouble Getting RAM to 2133MHz on RIVE BE with a 4930k

Hello,I have been experiencing random BSOD's when attempting to get my Corsair Dominator Platinum QVL verified RAM to run at advertised speed of 2133MHz. I have 4 8GB sticks running in quad channel config. My PSU is a Corsair ax1200i, and my cpu is...

riesscar by Level 10
  • 20696 Views
  • 48 replies
  • 0 kudos

Crosshair V Formula Z, BIOS Problem,I need help!

I have just finished a new build and have been trying to configure the latest Bios update. After checking it out and doing a little tweaking, when I rebooted after accepting the changes it came up a request to enter a DVD in the correct drive to cont...

New pc build- q-code ae. No post.

First things first.SPECS:1 x Thermaltake Level 10 GT (VN10001W2N) Black SECC / Plastic ATX Full Tower Computer Case with Four Fans-1x 200mm Colorshift 1 x ASUS Rampage IV Black Edition LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 Extended ATX Intel Motherbo...

RlBE Offset OC (?)

So, I'm feeling out my chip right now by using the "offset" method of overclocking. I am currently using negative offset and was wondering if when you put in a value, if that value is compounded each time you change it or is there a set value that th...

fan controller set to TURBO, fan not hitting max RPM

i got this little nice SP120 Corsair Fan to replace my stock cooling fans.BIOS detected, run some monitoring software to verify RPM speeds.it hits 1300 RPM max, but the specs shows 2350 RPM. went back to bios > fan controller, change standard to TURB...

pedenski by Level 7
  • 16808 Views
  • 2 replies
  • 0 kudos

Asus Z-87 DELUXE Q CODE A0

I turned on the desktop and got the q-code code 40. Researched and found that I have nothing to do. (use win 8.1).When you restart the PC now presents the LED A0 code.What should I do?

Jarbas by Level 7
  • 4596 Views
  • 2 replies
  • 0 kudos

Moving to WC'ing

Quick question folks, going to be moving my Rig over to complete WC'ing....only my CPU presently under water but wany my SLi 780Ti under water as well.I'm going with Full EKWB's...now I want to keep my present PCIe Slot utilization of top Slot and th...

rjbarker by Level 11
  • 3936 Views
  • 5 replies
  • 0 kudos

Is my RAM working at 2133 MHz? - Maximus VI Formula

Hi all,Just wanted to check that my RAM is actually working at 2133 MHz.Here is the screenshots of Memory and SPD tabs in ROG CPU-Z (latest version from CPUID website) when I had AI Overclock Tuner set to AUTO (so Target DRAM Speed in BIOS was saying...

35765 35766 35767 35768

Maximum VI extreme OC not showing in OS

Hi all. I have manually overclocked my Asus Extreme mbb with 4770K to 4.5GHz. However the overclock is not shown in the Windows OS (7 64 bit). When I run various utilities such as CPUz and increase my CPU load to 100% the max it goes to is 3.8GHz. Th...

GodAtum by Level 7
  • 3187 Views
  • 6 replies
  • 0 kudos

R4E Black - UNBELIEVABLE! DISAPPOINTED! *Please Read*

Ok.. I must first say that this isn't my board... This board belongs to a friend of mine... It's brand new.. and I'm building the system for them.Specs First:RIVE Black (came with 0502 bios)3930K CPUEVGA GTX 780TI Classified (SLI)32GB Corsair Vengean...