Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

EPU and APM are no go

Enabling them from bios causes the pc to not boot, qled 50, currently I have asus suite disabled but I can actually enable epu from there even though it is kind of weird because once I check on the bios it is still disabled.

untore by Level 7
  • 2174 Views
  • 1 replies
  • 0 kudos

Crosshair Formula V -Z Code 66 problem

I bought a brand new rig with these components:FRACTAL DESIGN DEFINE R4 BLACK ASUS CROSSHAIR V FORMULA-Z 990FX AM3+ ATX CORSAIR RM SERIES 1000W GOLD MODULAR PSU ASUS RADEON R9 280X MATRIX 3GB PCI-E DVI/DPCORSAIR 32GB DDR3 VENGEANCE QUAD 1600MHZ CL9 (...

PowerV by Level 7
  • 11129 Views
  • 11 replies
  • 0 kudos

Missing USB drive.

Hey Guys, it's been a while....Just about to reinstall Windows 8 (accidentally deleted some needed folders !) and put my trusty 8Gb thumb drive into the usual slot, rebooted, pressed F8 a few times, list of drives to boot from appeared but there was...

Maximus VI Hero Dual Channel Ram Problem

Hello,I just built a new rig for gaming and ran into this problem I am using: Intel Core i5 4670K (Stock) on a Asus Maximus VI Hero with G.Skill Trident X 2400 OC Ram.Now, whenever I try to use the DIMMs on a Dual Channel config, it doesnt post. The ...

J0k3r by Level 7
  • 6450 Views
  • 7 replies
  • 0 kudos

M VI F + CM SIRUS headset; no sound with 3.5 mm jacks

I'd like to connect my headset, CM Sirus 5.1, to the motherboard with 3.5 jacks but no sounds at all. Also the CM Sirus software alerts me that "No device found" when I try to launch it. Also can't install the 1.1 driver, don't know why. So what did ...

Foxxx by Level 7
  • 3238 Views
  • 3 replies
  • 0 kudos

Code C0 on Rive ....

My PC has been off for a week and on power up now it gets to code C0 and stops .... Have removed ram, video cards and all case wires so only has CPU installed. Still gives C0 .. Have reset bios, removed battery, no change. Any ideas ? It was fine whe...

Zangzub by Level 7
  • 2924 Views
  • 3 replies
  • 0 kudos

R4BE Vcore not dynamic

Hello, is there a way to prevent it in the bios vcore is dynamic but static? I do not use the vcore off-set, However, controlling cpu-z vcore and dynamicsorry for my english