Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Need Help getting Max V Formula into efi shell

OK so i'm trying to flash a raid card and the program needs to be run from the "efi shell"I"ve tried a couple of different things but so far no luck. I've tried formatting a USB drive in fat32 and then putting the shellx64.efi file on it but no luck...

Rampage IV extreme BDOS / crashes

Hello,First of all - i'm a complete newbie when it comes to system maintenance. I would appreciate any and all advice i can get.I have been having BSOD / general software crashing issues for a very long time. I have reinstalled windows, changed my RA...

Pathan by Level 7
  • 2267 Views
  • 2 replies
  • 0 kudos

Rampage IV Black - Updated BIOS, computer shuts down

Hi all, I just put together my new build. Everything is on air at the moment, and I was going to make sure everything is running good before moving it to water.I've been having pretty poor performance in games and I decided to update my BIOS to the ...

Maximus VI Formula sound issues

When I got my new PC, I formatted the SSD and did a full install of Windows 7 Ultimate 64bit. I installed all of the software/drivers from the ASUS DVD supplied with the motherboard and video card.I have then applied all of the available Microsoft W...

MAXIMUS VI Formula BSOD code 0x00000124

hello everyone. First off . This is my first post. I purchased the formula the first day it came out. Everything is great running at stock. It is until I attempt to over clock it(With Presets and or manually) I am getting BSOD screens with the 0x0000...

What is this driver?

Under the utilities section for M6E:ASUS_AMDA00_ACPI for Windows 7 32/64bit & Windows 8 32/64bit & Windows 8.1 32/64bit.

Hopper64 by Level 15
  • 21642 Views
  • 22 replies
  • 0 kudos

Maximus VI Formula Q-Code 55

Hi Guys,I'm trying to build a new pc, but am stuck when booting - I'm consistently getting Q-Code 55 (No Memory Installed). If I take the memory out then I get 53 (Memory Initialisation error).I've tried the memory in my old PC and it appears to work...

RIVE- No boot from sleep mode

Hi all,Computer will not come back on after it goes back to sleep. 50/50 chance it boots. everything but monitor turns on but its unresponsive so i force shut down. Boots to screen saying "Overclock failed". Then boots fine after forcing me back into...

warhog22 by Level 7
  • 29115 Views
  • 41 replies
  • 0 kudos

Crosshair Formula IV Driver for ethernet controller

I'm trying to connect my rig with an ethernet cable but it will not work. I went to device manager and under other devices there was the "Ethernet Controller" listed with an exclamation mark next to it. I tried updating it but it says "Windows could ...