hello,i have been reading through the forums for a while now and couldn´t quite find the same issue that i have:i have:the asus maximus vi gene motherboardcpu i5 4670knvidia gtx 7808 gb kingston ram1 kingston ssd 64 gb1 hitachi hdd 450gb1 hitachi hdd...
Just finished a new build with the VII Hero and I am using the Corsair H100i with CorsairLINK to cool the CPU. After several firmware, BIOS and software updates, I got the CorsairLINK software to see the radiator temp and fan speeds and the CPU temp...
Just finished building the computer and getting error code F2 before restarting.Components:Maximus IV Extremei7 3770kCorsair Vengeance 8GBHD Radeon 6990The sticker says the bios version is 2001 (I think its the very last 4 numbers on the sticker near...
Hi, I have recently built a new PC, with this being the build -CPU AMD FX-8320 3.5GHz 8-Core CPU Cooler Corsair H80i 77.0 CFM Liquid Motherboard Asus Crosshair V Formula ATX AM3+ Memory Kingston HyperX Blu 8GB (2 x 4GB) DDR3-1333 Storage Samsung 840 ...
I built my own desktop this past winter and it just crashed. My system powers on but doesn't load the bios. Occasionally i get it to boot up to windows but when i do i get a blue screen. Almost every time i boot it up i get different q codes though t...
This is just a quick note describing what worked for me with this memory, since I couldn't find a review or anything written describing success or failure with this memory on an Ivy-E. The following rather conservative settings are stable with variou...
Good Day,I recently purchased an Maximus VII Hero and everything was fine about 2 days into the build, until I started receiving errors during boot up from the AI Suite. The Suite was working fine for a while, Then DIP5 would not load anymore and re...
I am using built in graphics at the moment as my gpus are out in waterblocksI wanted to ask a simple question, does overclocking while using the built in graphics need more volts or stop me from getting the most out the chip?would I be able to go fur...
Hey guys, i am planning my pc build for later on this year. I am not a complete n00b but i could use some help from some one who knows more.My first question is do i have to put my gpu in the top pcie slot?, i have never seen a video of someone not m...
when i place the USB thumb drive in the USB2 port then it gets recognized, but inserting it to the blue USB3 port, show nothing (in all of them).if i inser a USB2 Thumb drive in the USB3 Port then its working.only The USB3 inside the USB3 not working...
