Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Rampage IV Black Edition /AC4 & Rampage IV Black Edition

Hi,I'm confuse about download Drivers and Tools. My Motherboards version is Rampage IV Black Edition /AC4. But in the product registered show my product is Rampage IV Black Edition.Then i check Drivers & Tools about Both version is different... AC4ht...

Leoshen by Level 7
  • 2437 Views
  • 2 replies
  • 0 kudos

Plextor M6e 128GB poor performance

I just installed a Plextor M6E 128GB M.2 SSD onto my Asus Maximus Gene VII motherboard and ran AS SSD benchmark. I am getting in the low 300s for Sequental Reads and high 200s for sequential writes. I know that's not right. Did I miss a setting in...

Dual memory, VII Hero error 55.

Hello everyone,After 1st boot I get the error 55 on vii hero motherboard and no signal on monitor. It is supposed to be memory error caused by pins bending or sliding of cpu pads or memory sticks incompatibility but I checked everything and it seems ...

Rampage IV Extreme - ASMedia SATA problem

My R4E (w/ 3930k) is a little over 2 years old, and recently have problem with ASMedia controller.If I use the harddrive connect to either of the ASMedia controller (red) downloading or play video for a few minutes, the entire PC (Win 8.1) became ver...

zickvon by Level 7
  • 10785 Views
  • 13 replies
  • 0 kudos

Can't get speakers to work, maximus vii hero

Hi... brand new build here, everything is working just fine except the speakers. My headphones work ok though.Is there something I'm missing in the software to set them up? I've plugged them in about every way you can. My speakers are an older Alt...

tygran by Level 7
  • 3854 Views
  • 2 replies
  • 0 kudos

MG7 Lanes and m.2

hi all rogers,i have a mg7 MB and iam kinda confused about the lanesi need to install a wifi reciever and BT but when i came up with buying an intel combo mpcie card, i found that my m.2 ssd which is a 256 GB plextor is gonna be forced into x1 modeIs...

bios default

at extreme tweak i set optimized default . at cpu core rationit shows synic all cores then all cores menu is opened and all 4 coresare on auto. then if i checked the cpu core ratio tab i still have the auto choice which closes the 4 cores menu . whic...

BSOD from either the Motherboard or the GPU.

Okay, I'm unsure of which it is. Or, if it's a software issues, but I keep getting a rash of BSOD's. First, here are my specs.OS: Windows 7 Pro 64Bit Debugged SP1 CPU: Intel Core i7-4790 3.6GHz Quad-Core Processor CPU Cooler: Corsair H110 94.0 CFM L...

Bruggs by Level 7
  • 4783 Views
  • 4 replies
  • 0 kudos

Hero VII stuck at Q-Code A0

I got this new build a few weeks back, it worked fine for about a week then it started not booting, screens dont come on and the Q-Code is stuck at A0. Only way ive gotten past it is CMOS clear and then i can perhaps use it normally for about a day. ...

Raich by Level 7
  • 17680 Views
  • 4 replies
  • 0 kudos

Maximus VII Gene Help!

I have a maximus VII Gene with a 4790k, 7970 and 250gb samsung 840 evo. When I try to boot it goes through the normal POST checks but i doesn't show anything on the screen. Finally it stops at AE and 5 seconds later I'm in the bios. I have previously...