Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximus Formula 5 Error 55

Hello.First of all i would like to sorry for my english because it's not my native language and i know it very bad but at the same time i need help.Yesterday i got error 55 on my MB after i tried to change thermal compound. From errors list in MB's m...

Can't stabilize FX8350 at 4.7ghz

Hello everyone! I have the crosshair v formula-z and the fx8350 water cooled by a corsair h105 in push/pull.I also have the Corsair RM1000 psu. I'm currently at 1.343750 volts at 4.6ghz but i have not been able to go higher even when adding voltage. ...

KTflash by Level 7
  • 4657 Views
  • 5 replies
  • 0 kudos

Asus Maximus IV Gene-Z PWM issues (WCFT03 re-build)

Hey Guys, I've taken my build another step forward and I've run into some motherboard issues. Since the above photo, I've bought a new RAD to replace the Magicool 160mm I've gone with the HWLABS model due to it's higher fin count and larger depth. Be...

BigRed by Level 7
  • 5758 Views
  • 1 replies
  • 0 kudos

PC won't boot up with DisplayPort - help!

My new rig won't boot up with DisplayPort, it just starts and then shuts off after 1 second. When I plug the DisplayPort cable out of the graphics card, it will boot up and run with no problem, but I only have DisplayPort on my monitor. What can I do...

Active frequency mode missing in bios

As the AI Suite 3 settings are reset at boot, I intented to replicate the settings in the (UEFI) bios. Everything is pretty much in their default settings, no overclocking, only XMP profile enabled for the DRAM. As I'm currently not using programs th...

Maximus 5 Gene + Intel I350-T4 does not boot

Hi Guys,I have a new Maximus V Gene motherboard with 16GB RAM and a Sandybridge Xeon, it goes great. However, I needed more ethernet ports as I use this system with Linux for network simulation and purchased a Intel I350-T4 NIC. Upon installing thi...

RageX by Level 7
  • 16765 Views
  • 17 replies
  • 0 kudos