Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximus 5 Gene + Intel I350-T4 does not boot

Hi Guys,I have a new Maximus V Gene motherboard with 16GB RAM and a Sandybridge Xeon, it goes great. However, I needed more ethernet ports as I use this system with Linux for network simulation and purchased a Intel I350-T4 NIC. Upon installing thi...

RageX by Level 7
  • 16609 Views
  • 17 replies
  • 0 kudos

Multiple ACPI warnings HERO VII

I had problem whit drivers.Even i reinstalled system and drivers.Checked on everything.Device manager is fine.AMDA00 is installed and there are no sings of missing drivers.Just this ACPI warning is in event viewer and it comes from time to time.BIOS ...

X99-S easiest connection of WC pump 9V

Hi, I've connected the pump of my Fractal Design S36 AIO to cpu_opt.Since the pump makes quite some noise I've been recommended to lower the pump to 9v (2000 rpm) but afaik I can't control the cpu_opt. Can anyone verify this?If I need to connect it e...

USB 3.0 for mouse & keyboard - what!?

According to the manual for ASUS Maximus VI Extreme, page 2-16 section 2.3.1, they want you to plug in mouse and keyboard at the Intel USB 3.0 ports. WHY? :confused: Wouldn't it be the best to just plug them into the two USB 2.0 ports?Question #2:Do ...

Maximus V Gene Multiple probelms, including OCing.

Hi Guys,There are a few problems with my motherboard.Firstly, when I turn it on and do a cold boot, the power comes on for around 3 seconds, then off again for another 3 seconds, then the pc boots normally. Just before it switches off after the three...

Weidass by Level 7
  • 5040 Views
  • 7 replies
  • 0 kudos

USB 2.0 vs USB 3.0 - first startup (new build)

So I'm gonna boot up the PC for the first time and I wonder which USB-ports I should use for keyboard and mouse...USB 2.0 or USB 3.0? Can I use the mouse & keyboard on USB 3.0 ports without any problem since it's an absolute newbuild without any OS i...

Bios Update

I was wondering I built a system last year and have a Sabertooth 990FX r2.0 motherboard. I see there has been a couple bios updates since I bought this mother board. Now my question is do I have to update all updates or just the last one.I also have ...

Displayport to GFX-card or to mobo I/O-port?

I was just wondering, what is the best thing really? DisplayPort from monitor directly into the GFX-card's DisplayPort? OR... DisplayPort from monitor directly into the I/O DisplayPort on the motherboard? I've never heard anyone talking a...

EZ_PLUG_1 & EZ_PLUG_2 on single GPU card

Hi... I am only using one single GFX card right now since I took the other card out and gave back to my cousin. The thing is - I still have the connectors plugged in to the EZ_PLUG_1 and EZ_PLUG_2 ports on the mobo, because I thought it would not hur...