Dear All,please help i had this problem after changing the ram in my pc i'm using Maximus VII Motherboard.As can be seen, press power switch, PC turns on, 3 seconds or so later, dies. PC turns itself back on only work when i unplug power and wait 8 s...
I replaced the CMOS chip on my Asus Z97 Deluxe motherboard; which resolved the problem I had. However, I noticed now the IPV4 MAC address is changed to 88-88-88-88-87-88.I reported this issue to ASUS tech support; however, the tech support person se...
I've just noticed this issue after about six months of using the board... I noticed that I wasn't running as fast as I used to with my sabertooth 990fx(original, not r2) but never looked into it until recently, I figured after some updates and whatn...
Hi all I recently bought the Phoenix Blade 960 SSD and can't get it to work. My rig:• Asus Rampage IV Black edition, latest 0801 BIOS• Corsair 64GB 2400 RAM• 3 x Titan X video cards in SLI• A few SSDs and HDs on SATA ports.I've installed the Blade ...
Hi, I mounted a 4790K on my Z97-AR motherboard with a Tuniq Tower Extreme 120 cooler.I soon noted extremely high temperatures with no overclock and default BIOS setting (up to 90 degrees with few minutes of Prime 95).With HWiNFO64 I've noted that wh...
Hello,When using the Logitech Proteus core G502 and going into the UEFI, when i click on an item to change or button, the mouse goes 2cm down instead of entering.Any ideas? The mouse has the latest firmware and so does motherboard 1703Thanks,Tom
i dont see it in the download section for this MB
Like the title says, I have the Maximus VI impact and I want to free up a Sata port on the mainboard and go to an M.2 boot drive.I use single GPUs (R9-280x pc2 3Gd5) and I know it wouldn't really hurt my performance limiting the PCIe below 16x so the...
i tried overclocking in ai suits II long time ago. but i already uninstall it and i manually overclocked in bios but when i press [F5] for load optimized settings, it goes back to the settings that ai suits did. i alread remove the cmos battery and t...
I was told to clear the cmos and remove the battery to try and fix a sata port issue. where is the battery and how do I remove it?
