Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximus V Formula SATA Help

Hey all,I've got a Maximus V Formula new that I bought to replace an old Z68 Asus board. I went with the older board because my i7-2600k is still cranking and overclocks well. I've got two issues I can't figure out:1) The BIOS does not show the SA...

Maximus VII Gene SPDIF/Optical Out

Hey there guys, I'm trying to figure out how to get sound from the SPDIF on the board. With my Rampage III Gene, I was able to output Dolby Digital 5.1 and DTS with it, but when I upgraded to Z97 the drivers did not carry over, so all I have is HDMI ...

CPU Fan Error on R4BE Boot Screen

I installed 3 new fans, 2 WPM fans for a Corsair H110 CPU radiator and the other a case fan for exhaust im not sure which is causing the message "CPU fan error! Press F1 to run setup" (maybe the H110 pump on the CPU header?) I get it when I boot the ...

Maximus VII Hero sound problem

I found some problem with the integrated ROG SupremeFX sound cardmy speaker do not have sound on right channel when connect to back panel audio port, only sound output from left speaker sometimes, it just loss the sound suddenly and come back after f...

Maximus Formula Cannot enable AP Mode

Hi, I was using the AP mode function provided from the AI Suite 3 with no problem. But it stopped working when I moved to a new place.Got the following error when I tried to enable it.The internet is OK, same ISP as the one at my previous place - TPG...

Rampage 4 Black Edition, fan control

Hi all, I've got a fresh build as of last Friday, and am having the dreaded Windows 7 nvlddmkm.sys/NVidia/DirectX11 conflict resulting in BSOD 116 and Bugcheck Code 278. I've been working though the issues, updated BIOS to the latest, the Beta 080, a...

random shut down and shows error code 10

so when i get the shut down and restart I get an overclocking failed message. the cpu overclock was fine. I had run realbench stress for 8 hours several times with no issues. what i did not account for was the fact that my ram overclocked itself as w...

sabah70 by Level 7
  • 5781 Views
  • 9 replies
  • 0 kudos

X99 Sabertooth fan header + NVMe boot instructions

Hello I just got a X99 Sabertooth and I have been looking thru the manual i can only find the amperageof the CPU_fan and thats 1 amp 12 watts i could use the rates for the other headers. also it seems that onlythe CPU_fan and opt are PWM I have a Ph...

sunako by Level 7
  • 2746 Views
  • 1 replies
  • 0 kudos