Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Length of SLI bridge needed?

I'm getting the VII hero and I'm not sure if I should get the evga sli connector short or long. I've got two EVGA 980 TIs.

is 4-way sli bridge possible on a 3-way sli?

crossposting from the evga boards:Originally my manual for my ROG Rampage III Extreme states that correct configuration for 3 way sli ( on the REIII @ least ) was supposed to be: x16 skip X8 x8 In which case a 3 way sli bridge will not span that dis...

Maximus vii hero m.2 win7/8.1 install error

I am having trouble getting Win 7/8.1 (I have tried both, CD and USB) to install on my drive. The M.2 needs to be enabled in BIOS, and while the Win 7/8.1 can recognize the drive, and format it however I keep getting an error during installation. "W...

Only half of my memory is showing

Bought some new corsair vengeance memory, CMY16GX3M2A2400C11R, its only showing half of the amount in bios what is up with that, showing only single channel in CPUZ. Any idea what im doing rong in setting this memory up. Have Maximus VII Formula b...

PvtWulf by Level 7
  • 2941 Views
  • 4 replies
  • 0 kudos

ASUS Maximus VII Hero No Audio

I have recenty bought this board and here are the rest of my specs:ASUS Maximus VII HeroG.Skill 1866 8GB (x2) DDR3 RAMEVGA GTX 970I have fresh installed and fully update Windows 7 64bit.There's no audio whatsoever. Normally, Windows would install a d...

g3xarog by Level 7
  • 3535 Views
  • 2 replies
  • 0 kudos

X99-E WS question

Hi guys,I'm building a new X99-E WS rig and I'm having issues with the latest BIOS 1102 (probably bugs, behave just the same on two different boards).I'm not sure where to take this problem. ROG is probably not the right place for this board, but I d...

WillyK by Level 10
  • 2140 Views
  • 1 replies
  • 0 kudos

Sabertooth x99 sli spacing/bridges

I ought a nvidia 2 way sli long bridge and its to long. I think the short version will be to short. So is the only option the crappy ribbon cable and no hard sli bridge? I would consider using a 3 way bridge but the three way bridges are evenly spac...

Maximus VI hero no Q-code

Maximus VI HeroI7 4770K w/Noctua NH-D14 twin fanSeasonic 660XP2 PlatinumRadeon 7870XT2x8G Trident 2400Suddenly stopped and won't POST.START and RESET lights on motherboard on but no Q-Code or any other lights.Replaced Seasonic PSU with another new id...