Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

AI Suite 3 and Windows 10

the windows 10 compatibility checker states that th ASUS AI Suite 3 is NOT compatible with Windows 10 AND WILL NOT WORK. I hope this issue is being worked on...

Maximus VII Formula Thermal Zone Locations

I am using CorsairLink to control and monitor my fans. It also reports temperatures from my M7F board, but I am trying to map the location of the following sensors:1) Mainboard2) TZ003) TZ01Does anyone know where these locations are on the board?

Asus maximus vi hero Audio Problems

Hello friends of ROG i have problems with my Asus maximus vi hero and my 5.1 Speakers dont work all speakers, i reinstall the driver and install again the windows but the problem its the same, i have the lastest bios "1603" windows 8.1 and logitech z...

Pocito by Level 7
  • 2576 Views
  • 0 replies
  • 0 kudos

Killing USB Power when System is OFF

Hi all!I have enabled ErP in my bios so as to kill my USB ports when the system is off. (This puts my DAC speakers and external drive bays to sleep...)The only odd thing is that the machine has three goes to boot up. First, on initial start up, it im...

RobSys by Level 7
  • 2534 Views
  • 3 replies
  • 0 kudos

Display related troubles

Howdy guys, I have some weird issues since I have built my machine.CPU: 4790K no overclockRAM: 24GB (3 sticks due to 4th being faulty - machine won't post with it)Cooler: H100i GTXMobo: Asus Maximus VII Ranger GPU: GTX 690 (never had this issue with ...

Rog pulse

So setup everything,flashed bios (1503) to enable me to use my 4690k. (Did this on my desk with usb stick and psu nothing connected and no cpu)i then realised after setting up everything, that my OC panel shows just zeros.checked the cable etc everyt...

dll Error in ASUS AiSuite3 Fan Xpert 2

Hi, finished my new mITX build with the new VII Impact, installed ASUS AI Suite 3 with all its software, ran optimization, went to change fan curves manually and I got an error saying:"Access violation at address 03376D68 in module 'dip4.dll'. Read o...

A2 Q-Code when GTX Ti 980 is installed.

"System Info"ASUS MAXIMUS VII HERO LGA 1150 Intel Z97Intel Core i7-4790KMSI GTX 980TiEVGA 220-P2-1000-XR 80 PLUS Platinum 1000 WCORSAIR Vengeance Pro 32GB (4x8GB) 240-Pin DDR3 1866Samsung SSD 840 EVO 250GB"Problem"First day the system worked fine, bu...

Eckaji by Level 7
  • 2561 Views
  • 2 replies
  • 0 kudos

M7i + HyperX M.2 drive install help

I have a MVII Impact and I am trying to install windows on my HyperX M.2 DriveI am getting the AE q-code and I am not sure how to fix this within bios.Other system specs:i7 47902x 8gb ramonboard graphicsHdmi to monitorI can get in to bios with the AE...