Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

X99-S , code 95, VGA_LED solid red

Hey guys... I believe it is likely this is indicating that my pci-e bus is "shot"... does anyone have any experience with this? I have sent in an email to Asus regarding a possible required RMA but thought I should post here in the meantime whilst wa...

anicca_ by Level 7
  • 5543 Views
  • 3 replies
  • 0 kudos

Q-Code 95 + VGA LED for X99-A USB 3.1 - Won't post or boot

System:Windows 10 64-bitCPU: Intel I7-5960XGPU: Gigabyte G1 GTX-980 TI - 6GB RAM64GB Asus Dominator DDR4 RAM1000W EVGA G2 PSUOS on 250GB SSD, several other SSDs and HDDs connectedI've recently experienced several issues with my GPU, including one or ...

Vaipan by Level 7
  • 9223 Views
  • 3 replies
  • 0 kudos

ASUS Prime B365M-A

Hello, I noticed a lot of Legacy settings in the Motherboard BIOS is that normal or does some of it need to be set as UEFI. Mostly I'm just seeking advice and solutions.

NVME M.2 drive not recognised in Maximus VII Impact BIOS

Hey, I'm having an annoying issue with my VII Impact and the 1TB Toshiba XG3.The SSD is properly installed and is visible as a drive in windows 10, and I can even begin installing windows on it, so there's no fault with the hardware. The issue is whe...

d0mini by Level 7
  • 16694 Views
  • 9 replies
  • 0 kudos

Sabertooth X79 + 3x m.3 samsung 980

HiI recently bought this adapter (it does not have the ability to create arrays and I'm not interested in the possibility of creating them)https://market.yandex.ru/product--kontroller-pci-e-4-porta-m-2-nvme-model-pcie4nvme-espada/1741724663?cpa=1The ...

Nasern by Level 7
  • 849 Views
  • 0 replies
  • 0 kudos

question

so this may seem like a very silly question to some of yall and for that i do apoligise im asking because i dont know lol so i am looking at the ASUS ROG Maximus Z690 Formula(WiFi 6E)LGA1700 and it has the built in cross chill ports well i had seen...

CD7982 by Level 7
  • 962 Views
  • 3 replies
  • 0 kudos

Q-code 10 Crosshair V Formula-z

Hi everyone, recently i change the thermal paste of my pc, and add a new ram of 8 gb to have 4x8 ddr3, after all that, the pc start to stuck with the qcode 10, i check every Ram in the A2 module and every single one works, i already reset the CMOS, a...

PRIME B660M-A D4 Missing Drivers

Hi Everyone,I just set up a new system yesterday but there are some drivers missing which I'm looking for assistance with. The board is: PRIME B660M-A D4.I installed everything off the board's webpage, as well as the Intel Driver Support Assistant, b...

Sabertooth Z77 Bios kaput Flashback not working.

Hi there,I spent a whole day trying to make Sabertooth Z77 flashback to work and it doesn't.I have done exactly like instructions:1- USB Pen Drive to both Fat and Fat32 as MBR and many different allocations sizes + many USB pen drives including mSD a...