Hi all. I have the Hero VI motherboard and I've been running a single GTX 770 card on the top PCI-e slot (nearest the CPU) with no problems. I just got hold of a second GTX 770, same brand and model, to run SLI but I'm having a problem getting both c...
Ok guys, coming from a Crosshair II Formula to this newer CVZ, I've noticed the fan control quite lacking.I was able to control almost all my headers independently on the CIIF through speedfan.Now I'm only able to control two fans.I'm curious about w...
Hi, Im on a RIVbe (Rampage IV Black Edition) and running AI Suite 3 on win 7 64bit (also tested it on win 8.1), When setting up Fan Xpert I need to know what Temperature the charts/fans are based off of? IE is it the Motherboard temp? the CPU Pa...
Hi there guys, recently i got a ES version of the 3960x known as the qa93. problem is.. my bios has been already updated from . ROM to . CAP and i need to flashback it back to the 1203 version, wich is the last one that accepts ES cpus .my current BI...
Ok guys, check this... I have two sensors reporting as my CPU temp, one is the CPU sensor and the other is the Mobo's CPU sensor and they are both telling me very different readings...Which one do I trust for this mobo?One max is 61c while the other'...
hello everyone,first of all i am not an expert in overclocking.but,i do have basic knowledge.i am running the rig in my signature below.in bios i am just using xmp profile & turbo mode.i know my cpu turbo freq is 4ghz.what i want to know in turbo mod...
AI Suite will not uninstall, nor will it run at all. I have downloaded the Cleaner.zip file. However, it clearly states to uninstall AI Suite ii before running. I would like to re-install after.
hi guys,i have trying to fix this problem for a long time... and nothing fix it or im so dump...i have already updated everything i could... the problem is the unknown device pop up is always appearing and making that sound... here is the error Devic...
I have reached a stable over-clock of 4.4GHZ on my 4790K @ 1.134 volts and it was set manually, I noticed that by default when setting adaptive voltage and leaving everything on auto with intel speedstep enabled and power plan set to balanced under W...
Welcome to my nightmare. My first Crosshair board fried a cap the moment it powered up. Nothing was shorted, and since then I've used a micro-atx in this case that worked flawlessly. I am now on my second Crosshair V Formula-Z board, and whilst my l...
