Other Motherboards
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Gryphon Z97: can't overclock i7-5775C

Hi guys,here I have a Gryphon Z97 with the latest BIOS 2601 and an i7-5775C. I want to increase the maximum multiplier in turbo mode. With my i5-4690K, I could simply set it to "Sync all cores" and put in a number like 42 to have a maximum turbo mode...

AM3+ ROG Mini-ITX?

Will ROG ever make an AM3+ ROG Mini-ITX motherboard? I have the ROG CROSSHAIR V Formula-Z in a Corsair Obsidian Series 800D case, but lately I've been wanting to build something smaller. Maybe it has something to do with how small some of those Steam...

setting for i7 4790k

I know their is a post here based on the bio's setting on voltage for the i7 4790K to help keep temps down.For the life of me I cannot find it.. Anyone have any idea?

R4Be Error 34 after Fan installation

HelloI just called the asus service but they only told me i should rebuild my pc, which isnt possible because of hard tubing. My problem is, i indtalled some fans, replugged my hdds and startet my pc. It didnt boot. After a short time y saw my cpu po...

Maximus IV Extreme z Hyperx Fury 8Gb modules support

HI,i recently bought 4 x 8Gb Kingston Hyperx Fury modules (ram upgrade 16->32gb). According to the available doc those should be supported by the motherboard. What I experienced was error 55 (no memory installed). After some research and discussion w...

Big Problem No signal monitor error 00 asus maximus 7 ranger

Hello my friends.first of all sorry for my bad english.I have a big problem with my pc specially with motherbord i thing.all are good 2 weeks and now when i start pc he didn't boot.all fan cooler are on but no signal to display.i start to move dvi ca...

Djtazzo by Level 7
  • 7 replies
  • 0 kudos

Hero vi problems coming out of sleep?

Hey all! Figured i could find some help in here. Finally got around to trying to get a real overclock going on my rig. I had reset the bios to optimized defaults and started following instructions in the Maximus Vi guide on here, and in the vide...