I'm not entirely sure what's going on with my system.. Ever since I updated to BIOS 4502 on my Rampage IV Extreme it's been freezing on me at random.. It might freeze while booting within a few seconds before reaching the BIOS, or it might boot into ...
I've read a few times on this forum that it is possible to remove the bluetooth module on the Rampage IV Extreme. Any ideas how to do this as I've tried pulling on the end of the bluetooth module and it didn't work. Also if it is possible to insert a...
Motherboard model: Maximus VII ImpactUEFI Version: (Serial 150749099900105 Bios Version 2902)CPU: i7-4790k @1.168v (No OC applied)Memory kit part number (s) and amount in GB: KHX1600C903/8GX - 8GB TotalGPU: Intel HD4600 (No dGPU as of yet)SSD/HDDs/Op...
New member, First post on the forum ...Have a FalconNW PC with a Rampage III mb and an nVidia Quadro 2000 graphics card. Just picked up a Dell 24 UltraHD 4K Monitor - P2415Q, and am pretty sure I will need to upgrade my graphics card. Not a gamer, do...
Hi Sorry a bit off topic, as I only have ASUS Z170 Deluxe motherboard.I'm trying to make Team Group Xtreem 2x8GB DDR4 (TXD416G3733HC18AD) memory to work on on 3733 Mhz using stored XML profile, but unable to do so. Every time PC tries to boot, it sto...
Hi!I,ve got Maximus VII Hero, i5-4690K and sata HDD. It freezing when starting up at the windows logo. The same problem when I triyng to install Windows 7 or 10 from usb flash drive.Windows 7 (64 bit). Bios 2902, older 2801 also used.All MS-DOS based...
Hy guys i have windows 10 installed on my ssd but the strage thing that i noticed in hd tune that when i test if i am not moving the mouse durring the test my transfer rate is about 350 mb/s but when i am moving the mouse duriing the test the rate of...
hi allis it possible to sli two zotac gtx 980 amp extreme cards on a rampage gene iv mobo?
UPDATE SOLVE:I had to manually set memory timings. The bios does not auto config the timing correctly.YOU HAVE TO ENABLE XMP under ai tweaker. Thats the only way for the bios to run your memory at rated speeds.As soon as I enabled that, it automati...
So today after making some changes in my BIOS I noticed a few weird things that I did not notice before.After clearing CMOS I noticed that upon the next boot when its says " Press F1 to recover bios settings" that pressing F1 doesn't take you into th...
