Help
Other Motherboards
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

Maximus VII Gene - fails boot with code E2 (video post)

This machine was running fine for several months (bought May 2015), but recently it fails to boot at all.. It just stops with E2 on the MB display, and nothing on the monitor. We've tried both with and without extra video card.Any ideas? Or should I ...

jandj by • Level 7
  • 3216 Views
  • 1 replies
  • 0 kudos

Advanced RMA issue

Hello,I'm posting this to see if I can get any help with a problem I'm having with ASUS customer support.My Maximus VII Impact developed problems about 2 months ago so I contacted ASUS and they told me they could do an Advanced RMA for me. So I went ...

Surge Protect + Bios showing Wrong Voltages!! (12V 5V 3.3V)

Hi all,Today during boot the PC switched off and a message appeared saying that surge protection was activated. When looking inside the voltage monitor in bios I noticed that 3.3V, 5V and 12V rails were reading 2.928V, 4.440V and 10.464V respectively...

RAID 0 array breaks on reset to default settings or any change

Have only encountered this problem since upgrading to the latest bios version on my MF7.When I upgraded the bios and the settings were all reset once I renabled raid my raid 0 OS array came up as failed and one SSD would come up outside the array.I r...

D3LTA9 by • Level 7
  • 3487 Views
  • 2 replies
  • 0 kudos

Z170 Sabertooth mobo fan noise at boot

Hey,I installed both the small fans that come with the board and they run very nice and quite once the boot sequence has passed, however, as soon as I press the power button, one of them ramps up to 100% (I think) and keeps running like so (emitting ...

b0gd4n by • Level 7
  • 3296 Views
  • 1 replies
  • 0 kudos

maxinums 8 ranger with error code 00

I bought this machine 4 months ago & it perform very well.but than 2 weeks ago the machine couldn't boot up & showing LED 00 only.i have tried to flashback bios before but totally not helping.anyone know this problem & teach me how to boot up my pcMa...

Crossfire question; psu support two gpu's?

I am running a 1200 watt psu will it run two "SAPPHIRE Tri-X Radeon R9 390X" in crossfire?My build:OS: Windows 7 Ultimate 64bit.Mobo: Crosshair V Formula Z.CPU: AMD FX-9590 Over Clocked @ 4.8ghz | Turbo 5.0ghzRAM: 32GB.PSU: 1200 watts.

Maximus VI Hero windows 10 audio bug.

Anyone experiencing low volume from right earpiece as compared to left earpiece using new win 10 driver. When i use win 8.1 driver there is no problem. Can anyone suggest me solution for this problem, i tried every latest driver available on realtek'...

Aakash by • Level 8
  • 6374 Views
  • 4 replies
  • 0 kudos
Labels