Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximus VII Formula, new build - very slow POST

Hello,I hope to get some help/good advice here. Just finished building a new PC on Maximus VII Formula, installed OS (Windows 7), drivers, etc. and stumbled over POST taking too long to go through (at least 20 seconds). Then Windows loads and shuts...

Hero RAM speeds running SLOW?!

So i have a buddy of mine that has had this build for a while now with no priblems. I had him just send me some normal spec info to look at as he is thinking of upgrade a few things and i see his RAM speeds.Here are his specsCPUIntel Core i7 4790K @...

Performace Problem

hey guys was not sure what to call this one but here goesnow this performance problem only happens when open windows as stuff starts to flicker and to get it back to normal is to reboot the system and sometimes that does not help and the flickering c...

Asus Maximus Extreme Overclock Memory Help

Hello guys , i own the Asus Maximus Extreme and lately bought the G.Skill Ripjaws 8GB 2x4 DDR3-1600 with Timings: 9-9-9-24-2N and 1.5 vim not into overclocking but i changed the setting from the bios from auto to 1600mhz for the memory cause the mod...

empodio by Level 7
  • 18912 Views
  • 15 replies
  • 0 kudos

Hero VII - *extremely* slow disk writes - SSD / RAID0

Title sorta says it all. For quite a while I've seen issues where my disk utilization would spike to 100% and basically bring the system to it's knees. Any moderate disk writing would do this and the system would be almost unusable until the operat...

Window 10 crash (FX-9590/Crosshair Z)

I'm running FX-9590 on a Crosshair Formula V - Z on a brand new build. I have the ATX 4 pin and 24 pin used. Since I tried to use the 8 pin on the MB and it would not post. I notice Window 10 home 64bit will lock up and then restart itself after I g...

amusa by Level 7
  • 3290 Views
  • 1 replies
  • 0 kudos