Hi I have a RIVE mobo and a EVGA 970 in it. I am needing to take the card out but the white thing you push down to pry the card up fell off...is there any other way to get the card out?
Hello everyone,I have an issue since upgrading to Windows 10, the display and sound will hiccup for a split second. It is barely noticeable sometimes and might be even less than a second. This did never happen when I ran Windows 8/8.1. It happens whe...
Hi All,SPEC:CPU: i7-4790kCOOLER: CM 212XMB: MAXIMUS VII GENERAM: 8G G.Skill 1600 x 4GRAPHIC: Sapphire Dual-X HD7870PSU: 2themax 750W, used 6-7yearsrun linx, all memory, 5-6 times then reboot. Temp around 95-100 degree.run OCCT by default setting, a...
I've got a Rampage IV Extreme running ESXi 6u2, and I'd like to boot from the video card in PCIE_X8_2A or PCIE_X8_2B instead of PCIE_X16_1.PCIE_X16_1 has a GTX 960, as does PCIE_X16/8_3, I'd like to save those for VGA passthrough and use PCIE_X8_2A's...
A perfectly working microphone sounds really low and with a lot of noise on a clean win 7 64 bit install using the latest drivers provided by Asus for the Maximus VI Hero (Realtek_Audio_Win7-8_8-1_VER6017023)Nothing has been overlooked (volume levels...
TL;DR Version:Built new system with Asus X99 Deluxe-II, Intel 5820K and 8x8GB LPX 2400 mhz DDR4. PC POSTs after 2 restarts giving codes "bd" and "b9. Eventually POSTs and boots. PC does not turn on using only 1 to 6 sticks; only when using all memory...
I have a Rampage IV Extreme motherboard with the latest BIOS (4901). I am trying to replace one of my 2TB hard drives with a 4TB hard drive. The problem is that the motherboard will not detect the 4TB hard drive on any of the SATA connectors. Is t...
Motherboard is Maximus VI HeroHow to turn the USB ports off when the computer is shut down?Looks like the USBs are powered even when the PC is off.Must be a setting in BIOS.Thanks
In device manager, for one of three "standard sata ahci-controller":This unit cannot start (Code 10)I/O device errorPCI-bus 0, device 31, function 2Device PCI\VEN_8086&DEV_1D02&SUBSYS_84EF1043&REV_05\3&11583659&0&FA had a problem starting.Driver Name...
