Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Asus z170 Premium - slow nvme and SATA

Hi, Just changed my computer. Had an Asus P8P67 Deluxe, a 2600k and a Samsung 850Pro 1Tb. I now have an Asus Z170 Premium, 6700k, same 850pro and a Samsung 950 Pro nvme 512Gb. On my old P8P67 the 850 Pro was doing great (550Mb/s read and 500+ write s...

arshlan by Level 7
  • 5044 Views
  • 3 replies
  • 0 kudos

Crosshair V Formula Boot Device LED

I've had this motherboard for roughly 2-3 years no problems. Then today I was playing a game and the whole computer shut down. I had to turn the PSU off and then on to get it to boot back up. I tried restarting several times. Sometimes it would stick...

Wyzrd by Level 7
  • 7587 Views
  • 6 replies
  • 0 kudos

ASUS Z170 PRO GAMING memory module+post issue...

I'm unable to get my system to POST, in bare bones mode, when installing all four memory modules.I've confirmed that all four modules work fine as do the slots on the mobo.It's only when all four are installed when the issue repros.Components being u...

H110 CPU Fan error

Hello,I have installed Corsair H110 on my new ROG Rampage IV Black Edition. I have connected the pump to the CPU_FAN. When I start the computer it says: CPU Fan Error. My CPU Q-FAN Control is "Enabled", CPU Fan Speed Low Limit is set to "600 RPM". Do...

k___x by Level 7
  • 32267 Views
  • 10 replies
  • 0 kudos

ROG Front Base w/ ROG Strix X99 Gaming

I have been back and forth with ASUS Support, and I don't think I am getting anywhere with them. Problem: Depending on the order of installing the Driver and ROG Connect, it makes my Front Base partially unusable. 1) Driver then ROG Connect - this...

mbze430 by Level 9
  • 3023 Views
  • 2 replies
  • 0 kudos

Strix X99 Gaming problems

I know this is the forum for Rampage V Extreme, but I couldn't find the Strix X99 Gaming forum so I post here.I have 3 problems with this mobo:The first one is that in Samsung Magician it can't recognize the SATA 3 port, and shows I'm using IDE inste...