Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Asus Z170-deluxe Bios Flasback

Hello Everyone,ít happened that after giving too much v (1,375) to my skylake i got a black screen "bios rebooting...." could not read so fast, after that i had a black screen,vents still running but nothing else happened so after 5 minutes i shout d...

RIVE Displayport causes overcurrent

Im going nuts and can't figure out why. Every time i use Displayport my PC get USB overcurrent during boot and shut my PC down. But if I use HDMI or DVI no problem. I thought maybe my Asus Strix 980Ti is bad, so i went and replaced it with another...

Maximus VII Impact not able to boot

Hi everyone,I'm writing here because this seems to be an official support forum for ROG products. I've purchased an Asus Maximus VII Impact motherboard thinking that this must be the best possible base for my new mini-itx system. The problem is that ...

tzili by Level 7
  • 8040 Views
  • 16 replies
  • 0 kudos

Maximus V Formula not always booting

Hi everyone! I've got a problem with the computer at work that's the same as the one in my signature. Also this problem is ocurring at my home computer.The problem is that the computer sometimes doesn't boot until I go into the bios and exit the bios...

Crosshair V Formula-Z Sata Ports Issue

I recently had to rebuild my pc I have covered everything made sure cables are all in.. Made sure motherboard is seated properly and cpu is in correct..However I can only use 3 of my sata ports and the rest do not see any hard drives when I install ...

Andy112 by Level 7
  • 2865 Views
  • 1 replies
  • 0 kudos

Memory training

Hi guys, my first post here So I have an i7 3820 paired with an P9X79 WS and 32GB (4X8GB) corsair vengence pro ram (CMY32GX3M4C1600C9R).With everything at stock sometimes the system views only 3 of my 4 ram sticks. The faulty one appears "abnormal" i...

danseva by Level 7
  • 12018 Views
  • 7 replies
  • 0 kudos

Maximus VII Formula DRAM Voltage Low 0.334V

Hello guys im not sure if this is a major issue, But it seems my Corsair Vengeance Pro CMY16GX3M2A2400C11 2x8gb's have an extremely low voltage its currently running in XMP on the bios at 2400mhz speed, both readings on Asus AI Suite II & The bios re...

60882