Hi,just got my board up & running and was wondering if there was any difference between the 2 x Intel NIC ports? I know they are different model numbers (82579V & 82583V) but is one better too use than the other?Thanks, Paul.
I hope this is the right place to post this. I just recently built my own PC and I feel like my system is a little warm or maybe even hot when it's under a load. I use Revit Architecture and 3DS Max to render instead of using it for games. Here is...
Can anyone explain to me what the CPUTIN, SYSTIN and AUXTIN temperatures are suppose to represent? The CPUTIN has been acting extremely strange on my Gene-z board. Most of the time it just sits at 60C and won't fluctuate at all. Other times I have ...
Just a few simple questions about this setup, (My RIG is in the Sig) When making changes under BIOS, then F10 to save and exit, It will reboot like normal, but power down completely for 2-3 secs, then boot up and load to windows. Is this normal? If n...
I know a good many has been asking about them in here. Splave has 2 new sealed for$100 a piece. So i thought i would pass it along to everyone here.http://www.xtremesystems.org/forums/showthread.php?273221-2x-ROG-Expander-boardsYou will have to be a ...
I've been searching around the forum to look for a successful oc of 4ghz does any one out there know how to stably oc to 4 ghzSystemi7-930rampage 3 extreme4Giz 2000Mhz xmp transcend RamGtx 470800 watt psuCorsair H50 CPU cooling systemWindows 7 64bit ...
hi guysI've a simple question.I want to connect 2 fan with a "y" cable on a single connector.Now i'm running 2 megaflow 200mm on a single cha_fan connector and them run fine.I prefer the Cpu_fan connector because the range that can be set is also un...
Everything runs fine so far with my new Crosshair V Board "BIOS 0506" with the exception that every time I start my computer, my cpu is overclocked to 3467.6 MHz and the voltages are above 1.404 V" a bit too high for such a low frequency."I already t...
Hey guys i just bought a new few parts Maximus IV Extreme 2nd generetion I5 2500k Evga 570GTX Antec Pro 750W 80 plus (gold) NZXT Phantom i got 2 old parts i'm using harddrive and Memory now my memory is g.skill 1066mhz now this system works but i can...
I'm doing my first build, with an ROG RE3. The manual indicates I can install the optional fan-thermal module (the little red heatsink thingie), but it doesn't say how to decide whether to install it. Should I install it?And, if so, how do I install ...
