Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

usb issue

does anybody else have usb issues..some of mine work some don't..tried from pch to nec and still nothing..installed updated nec drivers and still nothing..anyone else had this problem..asus maximus extreme p67

icemanjs by Level 7
  • 29822 Views
  • 33 replies
  • 0 kudos

Phenom Msr Tweaker

Hi, I'm trying to use Phenom MSR Tweaker with Crosshair V Formula, to enable CnQ, with an overclock of 200x20 1,525vI set P1 state to 4x multi and 0,8v, but the voltage doesnt change (cpuz), temps stay almost the same they lower 1 C, because of frenq...

Erick by Level 7
  • 5810 Views
  • 2 replies
  • 0 kudos

Only two DIMMS being used but 3 shown in BIOS?!

Hello everybody. First post!Here my specs.________________________________________________________________________Crosshair V (0506)AMD 1055T (stock at present)Corsair CMX6GX3M3C1600C7(XMP) 3X 2GBRadeon 6950 2GBHX850 PSUWindows 7 64bit_______________...

Retired by Not applicable
  • 7689 Views
  • 17 replies
  • 0 kudos

Disabling fan speed regulation feature?

Hi,I have a CoolIT ECO A.L.C liquid cooler for my processor. The pump needs constant 12V of power. I suspect the motherboard thinks the pump is a fan, and when the temperature changes in my case, the motherboard changes the voltage sent to the fans, ...

Retired by Not applicable
  • 3758 Views
  • 1 replies
  • 0 kudos

MIVG gpu connection issue?

Hi all,Last night I booted up my Gene for the first time, and I only can get video out through the onboard hdmi. I have an EVGA GTX 570 SC installed in the first x16 slot but I can not get the motherboard to recognize it. In the BIOS I have the defau...

Retired by Not applicable
  • 4670 Views
  • 4 replies
  • 0 kudos

Maximus III formula thermal pad

Hi, I decided to remove the EK block from this motherboard, and I don't remember if the large heat sink over the p55 PCH was mounted with thermal paste or thermal pad. At the same time, what is the chips mounted with thermal paste under the ROG log...

Area_66 by Level 11
  • 4949 Views
  • 5 replies
  • 0 kudos

CVF beta BIOS 0045

updates over 0038:disable ECC by defaultAdded ‘Stabilize Memory Timing’ option under DRAM Timing Controlhttp://www.mediafire.com/file/i141m9qolsxjdhn/CrosshairV-Formula-ASUS-0045.ROM

Raja by Level 13
  • 9981 Views
  • 16 replies
  • 0 kudos

Hard Drive Help ( Software Install Issue )

I currently havehttp://www.newegg.com/Product/Product.aspx?Item=N82E16822136284http://www.newegg.com/Product/Product.aspx?Item=N82E16820227714I want to use the ssd as a boot drive and im not sure if this is possible ( this computer is my very first b...

Retired by Not applicable
  • 5341 Views
  • 7 replies
  • 0 kudos

LF CHIP

so i open my board and something fell of of it. says lf on it. any idea what it is.

mudkip by Level 7
  • 5539 Views
  • 8 replies
  • 0 kudos