My 2600k idle at 1.248v (1600mhz), and it goes down to 1.184v (3800mhz) when loaded.What is going on here? Shouldn't the voltage increases with cpu speed and load ?
Well, first of all, if not for you guys, I'd be still playing around really expensive pile of parts, thank you all who contribute to society of extreme geeks, now to the business.1. In my build I have Samsung SSD 470, and I'd be damned if it wasnt gr...
Asus AI Suite II? Asus what happened to providing ROG users with the best of the bestAsus recently released the new AI Suite II, which combines the somewhat popular Asus monitoring apps and overclocking, such as PC Probe, TurboV EVO etc into an all i...
Targeted Overclock: 4200mhz.. did not overclocked. Everything below is my settings. Any advise? Why is it not overclocking? I am not sure what else to do.I did not see this: set VCCIO/SA manually to 1.10V -- where is this setting? I see only this: VC...
Hi,I'm trying to hook up the heatsink fan (Noctua NH-D14) on a Maximus IV -Z mobo, however, the heatsink fan has a 3 pin socket and the mobo has 4 pins.Will the bios be able to monitor and control fan speed in this instance without the 4th pin for pw...
Hope I could get some re-assurance here.I just got a maximus IV extreme Z. Setup is as followed:MaxiMus IV Extreme ZI7 2600k. Stock for now8gb(2x4gb) Corsair Dominator GT @ 1866 1.5v 9,10,9,27ATI 5850No windows updates yet. The PC is on a test bed an...
Hi all --The thread title sums up the most annoying of two problems. Whenever I try and restart or shut down my comp (and turn it back on), I have to reset the CMOS before it will let me power back up. Otherwise, I hit power, it cycles through the nu...
Ok i have 2 issues but 1st im going to present my hardware:AMD Phenom II X6 1100T Black Edition 3.3 GHz Socket AM3 6MB ASUS Crosshair V Formula 990FX Socket AM3+2 X G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V Coolermaste...
Hi, I was using an adapter to connect my main monitor (DVI to mDisplayport), I decided to just use my DVI as a main connector, and when I booted up into the bios, it was very low res and garbled with artifacts... anyone know how to fix without using ...
Does it only simulates overclocking or a good starting point? I see it being successful at 4.3ghz after start up but do I need to change the actual BIOS to achieve it?i7 2600K | ASUS Maximus IV Gene-Z | CORSAIR Vengeance 16GB CMZ8GX3M2A1866C9R| MSI ...
