Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Crosshair V will not boot at all, but MB onboard lights are ON.

Hey guys,So I had a big problem when I bought my Crosshair V from Amazon. Currently I am using a CHIV for my rig and it works fine and I was simply going to hot swap the motherboards. When I did however, to my surprise the new CHV did not boot at all...

Retired by Not applicable
  • 4483 Views
  • 5 replies
  • 0 kudos

P8P67 WS Revolution BIOS help

Hey guys, Looking to do some higher-end OC'ing on my P8P67 WS Revolution with the 2600k. So far i can hit 5.4GHz with what it allows me to top my voltage at (1.53vcore). If i go even .05v beyond that itll give me a "CPU Overvolt Error." I know my pro...

Retired by Not applicable
  • 4227 Views
  • 1 replies
  • 0 kudos

Rampage Gene 2 12v wont post

I have a Gene 2 which wont bootTheres an antec signature premium 650W providing the power and a core i7 920 installedEven with no ram, graphics or anything else connected - it wont boot or postI hit the power and the fans briefly spin up and then it ...

Retired by Not applicable
  • 3136 Views
  • 1 replies
  • 0 kudos

Sandy Bridge Voltage

My 2600k idle at 1.248v (1600mhz), and it goes down to 1.184v (3800mhz) when loaded.What is going on here? Shouldn't the voltage increases with cpu speed and load ?

paul878 by Level 7
  • 3221 Views
  • 1 replies
  • 0 kudos

Hey Folks, few questions here.

Well, first of all, if not for you guys, I'd be still playing around really expensive pile of parts, thank you all who contribute to society of extreme geeks, now to the business.1. In my build I have Samsung SSD 470, and I'd be damned if it wasnt gr...

Followed BIOS Settings here but still unable to overclock

Targeted Overclock: 4200mhz.. did not overclocked. Everything below is my settings. Any advise? Why is it not overclocking? I am not sure what else to do.I did not see this: set VCCIO/SA manually to 1.10V -- where is this setting? I see only this: VC...

Help on heatsink fan connection

Hi,I'm trying to hook up the heatsink fan (Noctua NH-D14) on a Maximus IV -Z mobo, however, the heatsink fan has a 3 pin socket and the mobo has 4 pins.Will the bios be able to monitor and control fan speed in this instance without the 4th pin for pw...

Retired by Not applicable
  • 3003 Views
  • 1 replies
  • 0 kudos

1 random BSOD

Hope I could get some re-assurance here.I just got a maximus IV extreme Z. Setup is as followed:MaxiMus IV Extreme ZI7 2600k. Stock for now8gb(2x4gb) Corsair Dominator GT @ 1866 1.5v 9,10,9,27ATI 5850No windows updates yet. The PC is on a test bed an...

Retired by Not applicable
  • 3005 Views
  • 0 replies
  • 0 kudos