Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Proper way to clear cmos?

Hey all,I recently upgraded on my older MIIIF from an i5 760 to an i7 870, when searching random forums I looked for what I should do to set it up properly. I should also add it was a bit of a system overhaul as I also upgraded to bigger power suppl...

Retired by Not applicable
  • 3054 Views
  • 3 replies
  • 0 kudos

will not boot first time. Red cpu light

Hello everyone. I just purchased parts for a new computer, here is what I have.Asus Crosshair V formula boardAMD fx-8150 CPUAntec high voltage gamer 750watt psuat the top of the board there are 2 4 pin 12v rails side by side, the one on the left had ...

Retired by Not applicable
  • 23473 Views
  • 24 replies
  • 0 kudos

Crosshair V Formula G.Skill DDR-2133 DRAM LED Red

Processor: Phenom II Black Edition 1100TMemory: G.Skill DDR3-2133 4X4gig (CAS latency 9; Voltage: 1.65; Timing: 9-11-10-28)HDD: Seagate Barracuda XT 2TB 7200PSU: Enermax MaxRevo 1350WVideo Cards: Asus HD 6970 X2 (EAH6970 DCII/2DI4S/2GD5)Monitor: Asus...

Retired by Not applicable
  • 4947 Views
  • 3 replies
  • 0 kudos

Rampage III Black Edition CMOS issue

Hey guys, here's the deal. For whatever reason, my R3BE refuses to retain any CMOS settings. The minute it gets pulled out of the wall socket (and the PSU's caps send the remaining current) for more than 10-15 seconds, upon boot it asks for CMOS Time...

Retired by Not applicable
  • 5556 Views
  • 7 replies
  • 0 kudos

Rampage III Extreme Edition Marvell Raid Issue

HiI tried to set up an raid 1 array with two Corsair Force GT 120GB SSD drives.So I entered the Marvell Raid configuration with CRTL + M and set up everything.This works fine and I started the installation of Win 7 prof x64.In the setup menue the dri...

yogg by Level 7
  • 29156 Views
  • 7 replies
  • 0 kudos

Help with OC of AMD Phenom II X 4 BE

Hi,I'm new to overclocking but I've recently upgraded my motherboard to an Asus Crosshair V formula.I have upgraded the BIOS to 0813.My system specs are as follows:Motherboard: Asus Crosshair V formula (0813)Processor: 3.20 gigahertz AMD Phenom II X4...

Retired by Not applicable
  • 3499 Views
  • 1 replies
  • 0 kudos

Reasonable Questions for SSD + Marvell

i7-2600k OCMaximus IV Extreme-ZOCZ Vertex 3 ssd 240g1TB standard driveEVGA GTX-580 1.516 gb 1600mhz VengeanceWin7 x64 Pro(other components left out)Main problem was no video on restart. I had to power down the system, and toggle the PSU power switch ...

Retired by Not applicable
  • 6463 Views
  • 5 replies
  • 0 kudos

no post after rebuild

so, i just got my computer working when the rest of my water stuff came in the mail. So it was time to rebuild the pc.i just finished my 24 hour leaktest, i get my usual giddy feeling of installing the rest of my components and powering on. hurrah no...

Retired by Not applicable
  • 6944 Views
  • 10 replies
  • 0 kudos

Weird readings in CPU-Z ROG Edition

Hey guys,So I got my system up and running with an 8120 today and I'm in windows now.However I'm getting really odd readings with CPU-Z.Also they seem to flicker all over the place. They will go higher, to their normal settings then back down and all...

3613 3614