Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

First PCI-E X16 works 1/8 times.

I'm prett sure that the first PCI-E slot is damaged since it only allows me to boot up once about ever eight times. Using the other slots it works flawlessly, but I shouldnt have to ignore the fact that my MOBO CHF5 is broken. Any ideas before I have...

C5F SB950 Port 3 works and fails in RAID mode

Okay, I've done some testing on my mobo... get ready for a lot of information.I've got a Crosshair V Formula, and I have a 120gb SSD as well as 4x1TB Seagate drives (not WD, because they disable raid features on consumer drives- BAD WD! BAD!). I've a...

Ram OC

So i have The Crosshair V Formula MB and i got G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL11D-8GBXL. I was wanting to overclock it so i went into the bios and changed it and and it ...

Retired by Not applicable
  • 4856 Views
  • 5 replies
  • 0 kudos

Maximus Extreme x38 Thermistors

Hi, I have a Maximus Extreme X38 motherboard in my PC, I have installed the thermistors to areas of the board I wish to monitors as well as connecting the other ends to the MB itself.The problem is, in the BIOS, the OPT 1 OPT2 and OPT3 temperature se...

Retired by Not applicable
  • 2580 Views
  • 0 replies
  • 0 kudos

CPU Temps / Cores Temps question

Hey guys,So I've been monitoring my system for a bit since I got my new setup finally stable.However I have a few questions.For the CPU, what is more important? Total CPU temps or Core temps? I have an FX 8120.This is what it shows for me idle right ...

3631

Load Line Calibration

Hi,I have some questions if anyone can help with regard to LLC.Q1: I'm trying to get my 2600k stable at 1.38v on my Maximus IV Extreme...I seem to be able to get better stability with vCore LLC set at 75% than at the recommended 50% for a 4.6Mhz OC.Q...

BenTed by Level 7
  • 9420 Views
  • 9 replies
  • 0 kudos

4 ram modules vs 2

Hi.. I cant really decide what ram to pick, I want tight timings for my 1100T but the only right timings I can find are 2x2GB modules, the 2x4 has slower timings..I thought about the Corsair XMS3 7-8-7-20 and run them at 1T. So here comes my question...

Stance by Level 7
  • 4251 Views
  • 5 replies
  • 0 kudos

ASUS C6 PROBLEM

MY SPEC:MB: ASUS IV Maximus Extreme Z (bios 0706)GFX: Gigabyte 570 socSSD: OCZ Agility 3 120GbCD: BlueRay recorder LG BH10LS30OS: Windows 7 64Bit (newest drivers etc)MEMORY: G.SKILL RIPJAWS X F3-12800CL8D-8GBXM (2x 4Gb)PSU: OCZ MODXSTREAM PRO 700W (r...

Retired by Not applicable
  • 14782 Views
  • 8 replies
  • 0 kudos

motheroard stuck on code 38, sometimes 58

Hello, I have the asus maximus Iv extreme, I'm new in the forums, and my computer has been having too many problems.After thinking that my computer had no more porblems after literally rma'ing all my parts, it still has problems.so, when i turn on ...

Retired by Not applicable
  • 5073 Views
  • 2 replies
  • 0 kudos