Hey all,I installed my Corsair Hydro H80. Temps are awesome on my 4.0Ghz overclocked 1100t. Couple of times now I get the CPU FAN_0 message from (I assume) the AISUITE. A check of HWmonitor, and a look in the case window confirm this and I shut down ...
I'm prett sure that the first PCI-E slot is damaged since it only allows me to boot up once about ever eight times. Using the other slots it works flawlessly, but I shouldnt have to ignore the fact that my MOBO CHF5 is broken. Any ideas before I have...
Okay, I've done some testing on my mobo... get ready for a lot of information.I've got a Crosshair V Formula, and I have a 120gb SSD as well as 4x1TB Seagate drives (not WD, because they disable raid features on consumer drives- BAD WD! BAD!). I've a...
So i have The Crosshair V Formula MB and i got G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL11D-8GBXL. I was wanting to overclock it so i went into the bios and changed it and and it ...
Hi, I have a Maximus Extreme X38 motherboard in my PC, I have installed the thermistors to areas of the board I wish to monitors as well as connecting the other ends to the MB itself.The problem is, in the BIOS, the OPT 1 OPT2 and OPT3 temperature se...
somebody pls help..i can only start the windows by GObutton, not by usual way, the start button..Crosshair V FormulaPhenom II X4 955EVGA superclock cpu cooler4GB G.skill ripjawGamma 600W PSUCM Storm SniperMSI R6970WD 500GB Caviar BlueWindows 7 Ultima...
Hey guys,So I've been monitoring my system for a bit since I got my new setup finally stable.However I have a few questions.For the CPU, what is more important? Total CPU temps or Core temps? I have an FX 8120.This is what it shows for me idle right ...
Hi,I have some questions if anyone can help with regard to LLC.Q1: I'm trying to get my 2600k stable at 1.38v on my Maximus IV Extreme...I seem to be able to get better stability with vCore LLC set at 75% than at the recommended 50% for a 4.6Mhz OC.Q...
Hi.. I cant really decide what ram to pick, I want tight timings for my 1100T but the only right timings I can find are 2x2GB modules, the 2x4 has slower timings..I thought about the Corsair XMS3 7-8-7-20 and run them at 1T. So here comes my question...
MY SPEC:MB: ASUS IV Maximus Extreme Z (bios 0706)GFX: Gigabyte 570 socSSD: OCZ Agility 3 120GbCD: BlueRay recorder LG BH10LS30OS: Windows 7 64Bit (newest drivers etc)MEMORY: G.SKILL RIPJAWS X F3-12800CL8D-8GBXM (2x 4Gb)PSU: OCZ MODXSTREAM PRO 700W (r...
