Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Help with OC of AMD Phenom II X 4 BE

Hi,I'm new to overclocking but I've recently upgraded my motherboard to an Asus Crosshair V formula.I have upgraded the BIOS to 0813.My system specs are as follows:Motherboard: Asus Crosshair V formula (0813)Processor: 3.20 gigahertz AMD Phenom II X4...

Retired by Not applicable
  • 3410 Views
  • 1 replies
  • 0 kudos

Reasonable Questions for SSD + Marvell

i7-2600k OCMaximus IV Extreme-ZOCZ Vertex 3 ssd 240g1TB standard driveEVGA GTX-580 1.516 gb 1600mhz VengeanceWin7 x64 Pro(other components left out)Main problem was no video on restart. I had to power down the system, and toggle the PSU power switch ...

Retired by Not applicable
  • 6183 Views
  • 5 replies
  • 0 kudos

no post after rebuild

so, i just got my computer working when the rest of my water stuff came in the mail. So it was time to rebuild the pc.i just finished my 24 hour leaktest, i get my usual giddy feeling of installing the rest of my components and powering on. hurrah no...

Retired by Not applicable
  • 6531 Views
  • 10 replies
  • 0 kudos

Weird readings in CPU-Z ROG Edition

Hey guys,So I got my system up and running with an 8120 today and I'm in windows now.However I'm getting really odd readings with CPU-Z.Also they seem to flicker all over the place. They will go higher, to their normal settings then back down and all...

3613 3614

Crosshair IV Formula DRAM LED

I have just finished assembly and cannot get this board to POST. Stops on DRAM and LED stays red.Croshair IV FormulaAMD Phenom II 1100t Black EditionMemory tried so far:Corsair Vengeance CMZ16gx3m4a1600c9tried as single sticks in all slots, dual in ...

Retired by Not applicable
  • 13844 Views
  • 9 replies
  • 0 kudos

ASUS P6X58-E Pro Review

PAGE 1: Introduction PAGE 2: Features PAGE 3: Specifications PAGE 4: Packaging and Accessories PAGE 5: Board Layout ...

3501 3502 3503
Kipper by Level 10
  • 21830 Views
  • 15 replies
  • 0 kudos

Crosshair V Formula VGA LED

Just built a new computer with the Crosshair V Formula. I have 2 Asus HD 6970 (EAH6970 DCII/2DI4S/2GD5) set up to run in Crossfire. I've checked and rechecked my connections. When booting the system, everything seems to run fine, except the VGA LED i...

Retired by Not applicable
  • 6792 Views
  • 4 replies
  • 0 kudos

Distorted UEFI what can I do to fix it.

I updated the bios to 0813 and it still looks like the res is way off. The GUI is to big. How do I change this? Also, is it possible to keep my raid 0 from my CHIV on my CHV. I can't install windows either. I get a " Windows can't configure and c...

Retired by Not applicable
  • 2444 Views
  • 0 replies
  • 0 kudos

Crosshair V with 8120 new install - No older CPU

Hey guys,I'm new to the forums and have read a lot on the Crosshair V and the AMD FX series.How I have a really big question and by reading these forums I'm finding information that seems grim for my situation. Basically I just want some clarity on m...