Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximus IV Extreme-Z Bios 706 (Final, Non Beta)

BIOS 0706 released October 10, 2011http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/Maximus_IV_Extreme-Z/Maximus-IV-Extreme-Z-ASUS-0706.zipRelease Notes--------------------------------------------------------------------------------[ 0706 ]---------------...

Retired by Not applicable
  • 7550 Views
  • 9 replies
  • 0 kudos

Setting up an SSD on a Gene Z

I set up my new system yesterday, and in all the excitement, I did not set the SATA to RAID, and of course, the Intel SRT did not work on the Corsair Force GT 120GB SSD. My first clue was when the accelerate button did not show up in the Intel SSD s...

red454 by Level 11
  • 2811 Views
  • 4 replies
  • 0 kudos

CrossFire Question AGAIN

I have decided to go with the ASUS Crosshair V Formula Motherboard... My question is:Can I still use all seven SATA connectors on the motherboard if I am going to have 2 x VTX3D Radeon HD6870X2 2GB in CrossFire???I have been looking at the motherboar...

Retired by Not applicable
  • 2063 Views
  • 2 replies
  • 0 kudos

Latest CHV crisis bios issue how serious is it.

Hi,I am running my CHV on 0506 bios. I got ready to upgrade to 0813 so I shut down the system and powered it back on.I got this message overclocking failed press f1 to continue. In this screen it shows that 8gb ram and all the disks and drives instal...

Retired by Not applicable
  • 7991 Views
  • 15 replies
  • 0 kudos

Specific USB device problems.

Gene-ZI'll get right to the skinny: my CM Storm Sentinel Advanced mouse is not responding correctly - I'll elaborate In a moment.I've tested every USB port, excluding USB 3.0.Every other device works in every other port.Every other device works in ev...

fatee by Level 7
  • 4027 Views
  • 2 replies
  • 0 kudos

Gene Z Chassis fan control

I just installed 3) Scythe SY1225SL12LM-P 4-pin PWM fans on the Gene Z board. They run at 1000 RPM all the time. Q-Fan is enabled in the BIOS, Using Asus Fan Xpert 1.01.01.unable to build a profile of the chassis fans in Fan Xpert, only the CPU fan. ...

Warning CPU PLL voltage 0.0000V

Dranm,PCH,VCCIO,PCH PLL, VCCSA, CPU PLL all shows 0v.I left my PC to go do some work while 3dmark was completing its benchmarks and I come back to that warning message and my computer running slow as heck. I had to hold the power button to power it d...

Retired by Not applicable
  • 14586 Views
  • 9 replies
  • 0 kudos

More Crosshair V Formula Problems, Not Generating BSOD's!

So basically I RMA'd my first C5F board a few weeks ago because the CPU fan header blew out during a boot a month or so ago and I'd been getting blue screens. Got the replacement board back yesterday and I got my first bluescreen today with the same ...

Retired by Not applicable
  • 7848 Views
  • 13 replies
  • 0 kudos

LAN Connection failure

Hey dudes,I got the problem, that my networkconnection is disabled at coldstart.I start the PC and its bootin... Just when I'm in Windows7 I got no connection.When I open the troubleshoot there is shown, that I should install the networkdriver.The ne...

Retired by Not applicable
  • 9857 Views
  • 21 replies
  • 0 kudos

Problems with new Gene Z on first startup

Built a new system with the Gene Z.Using an i7-2600K and Corsair H100.1TB Seagate HDD and 120 GB Corsair Force GT SSD.16GB Corsair Vengeance memory.On startup, I get a brief red ASUS screen with the option at the bottom to hit delete to enter BIOS.T...

red454 by Level 11
  • 6130 Views
  • 5 replies
  • 0 kudos