Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

OFFSET Voltage question....

I have a question.. If using the offset voltage function on vcore. Does it then use the manuel setting as a startpoint? Example:I set my vcore to 1.33 volt manuel. But then changes to OFFSET MODE. Will the "offset mode" then use 1.33 v as a startpoi...

lassek by Level 9
  • 4078 Views
  • 5 replies
  • 0 kudos

How far can I push my AMD FX-8150 for ~23h-24h/7d use

This is what I have been able to achieve so far with good results (This is also with all 8 cores active):http://valid.canardpc.com/show_oc.php?id=2167966My system:Processor: AMD FX-8150 (all 8 cores) Freq : 4846.23 MHz (210.71 * 23)Videocard: SAPPHIR...

HT on vs HT off on the RIVE: Think again?

I just did some testing W/the following settings:i7-3930KTurbo 46Vcore +0.02 (variable)Speedstep, C1E, C3, C6, & C7 enabledVCCSA 1.25VVTT 1.15VLLC mediumCPU current capability: 130%Bclck & strap both 1004.6GHzAnd I found that W/HT off:LinX PS 40K pas...

red cpu q led crosshair v formula

first off, here's what i'm usingMobo: ASUS Crosshair V FormulaCPU: Phenom II X6 1100T Black EditionGPU: Sapphire Vapor-xRadeon HD 5750PSU: Corsair TX950WRAM: 16 GB Corsair XMS3 (4x4Gig)Tried bench testing this brand new board, all power led's show gr...

Jearth by Level 7
  • 11227 Views
  • 15 replies
  • 0 kudos

Crosshair IV Driver problems.

Hi, I am re-doing my younger brothers computer, he deleted something of his OS on his SSD, so i formated the drive for him, downloaded him windows 7 64 bit.However, it seems that he cannot find his CrossHair IV driver CD:So which driver exactly is th...

thethat by Level 7
  • 3260 Views
  • 2 replies
  • 0 kudos