hola AllI just registered my Rampage 4 Extreme Mobo, and i have a question about the bios.I see that there are several BIOS updates, but do i need to flash from the first one, orjust the newest one?thank youBen
Enabled QFan but cannot see CPU fan speed vary. I tried Silent and Manual without success.Up until yesterday I was running on the initial 0208 BIOS and I updated it to 0403 but I'm still unable to control the CPU fan from the BIOS (I also tried by s...
HalloI've had a good search round and would just like to get some definite answers to a few things regarding AHCI.This will be for a R4E, a Crucial SSD and Windows Home Premium if its relevant.Do I have to install the intel AHCI/RAID drivers via F6 o...
How do I get the UEFI Boot on my Windows 7 Install to actually work so I can use a partition greater than 2TBs?I just did a test on a UEFI Capable server which worked fine, however I cant seem to get my 6 600GB Raptors striped up and running using th...
Hey guys,Really what I want to accomplish in the end here is overclocking my system to run at DDR3 2133 and CPU at about 4.5~. We'll get to that later. First off, here's what I'm working with:Cooler Master HAF X Crosshair VRosewill Lightening 800W815...
Im new to PhenomII ocíng, and im hitting a wall on my memory speed of 1880 any faster even with relaxed timings and i get crashes, ive tried more volts everywhere so im pondering is this an on phenomII memory controller limit thats stopping me?should...
ok um ASUS, if you make an ROG board, can you also make a battlefield 3 one? (like the rampage iv extreme BF3 edition)guys if u have any suggestion, post them in this thread
Hey.I would like to share with you guys, then I installed Windows 7 first time, it run awfull:(it was very slow overall, but after I installed Chipsæt/achi driver windows was fast like hell! and btw did not have any Internet connect after installed w...
Not sure if this is the right place to post this but a bunch of you helped me with my Motherboard issue and since it connects to the motherboard... I hope it is the right section. I have the FX-8120 on my Crosshair V Formula, And the temperature is.....
Hi allIve got a coolermaster 800w silent pro gold, with 3 hardwired cables. The 24 pin is obvious, but there's also a cable split into 2x4 pin plugs labelled in the manual as cpu and another 8 pin labelled as pcie.The 8 pin socket at the top of the M...
