Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Vcore value fix on R4Extreme

Hi friends, i don' t understand how to fix the value of the Vcore on my R4 extreme.I use the manual settings ( Not offset mode ) and fix the value to... 1.32V. for example.I restar PC and start Linx or Prime95 and see that this value start from 1.32 ...

BRUNEZ by Level 7
  • 4298 Views
  • 6 replies
  • 0 kudos

3930K and TJ. Max - Need some knowledge

Hi Guys,I'm my quest to reach 5Ghz, I'm getting closer to 91C. What will happen past 91C ? will the CPU keep working, will it crash, or will it die? Has anyone been past 91C ? if so, for how much time?The ScreenShot below was taken after 12hours of P...

FiNAS by Level 10
  • 15591 Views
  • 10 replies
  • 0 kudos

How can I overclock my ram?

I am using the G.SKILL Ripjaws Z Series 16GB DDR3 2133 (F3-17000CL9Q-16GBZH)Voltage: 1.65V Timing: 9-11-10-28I try to overclock it to 2400 and I changed timing to 11-11-11-28, it can not bootsIm a noob on ram overclocking and I could not f...

Eustia by Level 7
  • 4922 Views
  • 4 replies
  • 0 kudos

Need help: Asus rampage iv extreme

i just bought the ASUS RAMPAGE IV EXTREME mobo. the problem is i cant even access the BIOS. just a blank screen with debug light shows AF with red DRAM light. i have already updated the bios to 1130. but still the same. is it because the RAM is not...

42L4N by Level 7
  • 11671 Views
  • 18 replies
  • 0 kudos

Video: Nordic Hardware previews the Maximus V GENE

Nordic Hardware has recently published its preview of the upcoming Maximus V GENE ROG motherboard (bring your translator), along with an overview video of the motherboard below, showing its new specs and layout.

X-ROG by Level 15
  • 4477 Views
  • 0 replies
  • 0 kudos

R4 Extreme Raid0 Sata 6gbs not stable, RST driver is not good

Hi to all. I just read many things about this problem on many site but i want inform you of ASUS community...maybe you can help me. I have an ASUS X79 RAMPAGE 4 EXTREME Fw 11.01 with 2 OCZ VERTEX 2 with FW 1.35 and WIN 7 64bit and on this motherboar...

BRUNEZ by Level 7
  • 4980 Views
  • 9 replies
  • 0 kudos

R4E doesn't finish POST

Hey All - been running my R4E board since release and all has been well, up until a few days ago. I updated the BIOS to the latest on the support site (1101), then proceeded to reset my OC settings. It failed to boot, so I went back into BIOS and loa...

Which memtest is compatible with RIVE board?

I'm having trouble using memtest. Memtest86+ latest version is 4.20 but does not recognize the RIVE board and eventually freezes the PC. Normal memtest86 has to versions 4.0a and 4.0b. Supposedly 4.0b is for servers and 4.0a is for normal desktop use...

Problems selecting boot device on R4E BIOS

Hi all,I am unable to select the desired boot-device on my R4E motherboard.My setup is as follows:* Intel SATA controller: P0 -> SSD 120 GB (Linux) --> I want to boot from this!! P1 -> SSD 120 GB (Windows) P2 -> DVD P3 -> HDD 1.5 GB disk (NTFS)* ...

reddish by Level 7
  • 9883 Views
  • 4 replies
  • 0 kudos

High vcore and offset mode

I some more question in the quest to get my system OC 24/7. It is very stable now running at 4.6 and temps while running prime for a long time get to 70c and that is fine for me.For some reasons I have to set my vcore extremely high 1.45v right now f...

Perpixel by Level 7
  • 14976 Views
  • 21 replies
  • 0 kudos