Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Problems with RAM Modules and Maximus IV Gene Z

I've checked all DIMMS modules and they all work fine, as long as I plug them in channels B1 and B2 and only use 2 at a time they work flawlessly. I also got into BIOS and checked if the MOBO's RAM slots were working. I started up the PC with 2 DIMMS...

CBK by Level 7
  • 5808 Views
  • 6 replies
  • 0 kudos

rampage 3 extreme oc help

Hi, i am back again to ask for some help. My system is: rampage 3 extreme mobo,cpu core i7 950 and ram corsair dominator 1866, 6 modules x 2gb (total 12gb). My oc settings are: 185 x 22=4070 mhz, ram 1855 mhz, vcore 1.35v, qpi 1.35v, dram 1.60v. I te...

asus__ by Level 7
  • 3162 Views
  • 3 replies
  • 0 kudos

Rampage IV Formula + Phanteks heatsink

Hey guys, my question of the day is wether the Rampage IV Formula fits with the big Phanteks heatsink + a dual GPU below it without too much hazzle or trouble? I have a Asus 670GTX Direct CU II and a 3930K the last thing I need to know now is if my b...

Stance by Level 7
  • 3607 Views
  • 3 replies
  • 0 kudos

PROBLEM MAXIMUS V Internet

Hi guys I'm new here, from 3 days, I bought the V maximus my, my configuration is.Maximus VIntel i7 377016gb ram Corsair V cl8800W corsairAti hd 6870my problem is. when I play my ping goes from 30ms to 600 300 400 for 15 seconds then back to 30ms. Th...

Rampage IV and 3 Matrix GPU's

Hi Folks,I'm wondering if anyone has Tri SLi GTX580 Matrix cards running on the Rampage IV.SLi connections seem to present a problem as there are no solid 3 way sli bridges that I can find.Or can you use flexible ribbon bridges and if so what is the ...

Red VGA LED (Crosshair V Formula)

So I recently shipped my computer (done it before) and now instead of it booting up I get the Red LED for the VGA. Tried a known working graphics card to make sure it wasn't just mine, still nothing. Tried resetting the CMOS. If I boot without the gr...

Zalaras by Level 7
  • 6052 Views
  • 4 replies
  • 0 kudos

Raid problems

Hey guys, i'm back with unfortunately another issue. I've setup a raid 0 array with two SSD's which are recognized in my bios but when I try to install windows, it gives me an error of unassigned drivers and how windows is unable to support it. I t...

ASUS MAXIMUS IV EXTREME-Z No Debug Light

Hello,I just bought my new motherboard Maximus IV Extreme-z. After installing everything, I turned on the computer, but I have no lights on the debug console; only the start/reset button and the bios leds are on. All the fans start spinning for one s...

luisk by Level 7
  • 32176 Views
  • 30 replies
  • 0 kudos

Maximus V- Bios Update- Can't POST- Happened 2x

Hello Everyone, hopefully someone here can help me find a solution! I have gone threw two Maximus V Gene boards now, both with the exact same result, here is my story:This is my 4th Asus build, I have always updated my bios, and never had a problem. ...

Kaladryn by Level 8
  • 15828 Views
  • 12 replies
  • 5 kudos