Hii just purchased Maximus V Gene. I connected my cpu fans to Cpu-Fan and OptCpu Fan jacks. but fan expert program does not let me control the fan speeds. And they are always working at %100. So it makes some noise.My Cpu Cooler is Noctua NH U12 SE2....
Hi Guys,I've just buyed my brand new Z77 Asus ROG Gene V.I'm very satisfied of the platform but I've a few questions:If I want to monitor temps and voltages of the motherboard remotely (so without the ROG cable supplied), I can do it with Bluetooth a...
Hello ladies and gents. I'm new to the forum, and the computer building as well, I already purchased my case with the Crosshair V in mind, and now i have a couple questions about my setup I desire. Mobo = Crosshair V CPU = FX-8150 memory = G.Skill r...
Ever since I have updated to this bios i have been getting alot of problems!1. Can't open CPU-Z to check anything..It frezzes at loading Monitoring2. Tried running Speccy and that to does not work i get "Cannot initialise SPC dll"3. Also sometimes wh...
I was wondering if anyone has run into this where increasing voltage doesn't matter.For example, at 5089mhz I get this error with 1.5v or with 1.6v. I downclocked the ram to 1333 from 2133ish to make sure it wasn't that. Then I disabled HT. Then I ...
Hey guys,Have a strange issue here, and am hoping someone could shed some light on the problem.Whenever I try to use offset vcore of any amount, my computer won't post or boot. It will just stay on 'no signal', and keep trying to reboot itself, until...
Hi, I'm currently extremely eager to get my hands on a piece of Crosshair IV Extreme just because of the CrossLinx 3 function. But, I'm curious, With the CrossLinx 3 technology, can I use more than 2 dual GPU Graphic Card? Like the HD5970? or does th...
any ideas please ?in FAN Expert 2 they are greyed outin bios its set to standard fan profile ...they are always fixed to full speed - I know they are 3 pin non-PWM - but the Gene should still be able to adjust them like all my other non-PWM chassis f...
I have absolutely no idea why this just started happening. The computer will start from cold just fine, if I reboot it, it gets stuck at error code 65, won't post, have to power it off. It comes up, says overclocking failed, hit f1, save, boots just ...
Before we start, please check out JJ's Z68 unboxing video to get an idea of component designation:For our P67/Z68 series of motherboards, we’ve adopted easy (EZ) and Advanced UEFI BIOS interfaces to suit both plug-and-play and hands-on user mind-sets...
