Hi,I've had a Rampage III Extreme since release and one of the greatest things was able to use RC TweakIT on my Symbian/Android phones to switch on my PC and overclock: http://www.vortez.net/articles_pages/asus_rampage_iii_extreme_motherboard_review,...
Brand new gene v board with a brand new i5 2500k. Wont post and getting debug code OP. Ive tried both onboard graphics and discrete graphics. Memory is gskill 1600mhz. I checked for bent pins, reseated cpu, and memory dozens of times. Nothing wo...
Hi guys, new to the forum so i apologise if this has been posted before, i did flick through a few pages but may have missed it.recently contacted Asus to see if there was a PCI-e 3.0 development in the works for this board as i am looking to upgrade...
Hi guys, I hope to get some help on this forum because this error code just made me crazy over past 2 weeks:0d - Reserved for future AMI SEC error codesVGA LED stays lit red (CPU and DRAM LED pass the test normally)Appearing permanently on ASUS Rampa...
Hellow everyone,I am the proud owner of a Asus Maximus IV Extreme-Z motherboard which I bought 7 months ago.I have a question regarding the maximum wattage/consumption(W) or amps(A) that the can be supplied by the fan headers on the motherboard. The...
Hi AllI've had a good look round to see if this has been answered before, but whilst some threads hint at causes, none I've seen have a similar string of events. The nearest is unforunately in Spanish on this forumI offered to build up a working mach...
Hi Guys,Below is my config. When I go to "GPU.DIMM Post:" in Bios, it says 1600mHz DDR3, running at 1600mHz, when my ram is 2133mHz. I understand that it is running at 1600mHz, but at least expect the board to detect the right frequency, as I know th...
