Now that I have re-installed Windows and am ready to again OC, I ran some starting point test for my stock setting to see what the OC is giving me. I noticed that in Cinebench and in 3DMARK11 that it lists as only 4 cores. When running these test I...
1#Can i use the TurboV evo program to bump my CPU and tweak the Vcores in the bios? for better stability ? or is it that when i use the Turbo i cant tweak it manualy after in the bios.2#there is not alot information about OC-ing this board on the i...
Bought my Rampage IV Extreme from newegg the day it became available and installed it in my case the day it arrived. booted the system rescue cd and all was good. Installed gentoo Linux on sda. then installed windows 7 on sdb. After completing the ...
OK, still wrestling with lots of other weirdness but I am still running a dead stock 4170 and it idles at 55 degrees. I am running a bunch of older processor and they idle in not as well cooled cases between 34 and 42 degrees. I have had three diff...
Hey guys,I just picked up my new computer and put it together today, here are the specs:GSKILL 8 GB RipJwsX i7 3770K 3.6 GHz 8 MBMaximums V Gene (E7179)Cooler Master Hyper 212 EVOWD 1.5 TB TB 64 MB HDDAntec Basiq 550 w PSUAsus 121ST 12x BD WriterBitf...
Hi guys , i built one new computer in cyberpowerpc and i select asus rampage iv extreme , i guess this motherboard have first bios the factory i dont sure if cyberpowerpc update my bios , i watch this video and read this website http://event.asus.com...
In my BIOS it is only reading 8GB and in my System Properties it tells me that there is... Installed memory (RAM): 16.0GB (7.95GB unusable). And by the way when I use 2 x 4GB sticks it only reading 4GB instead of 8GB. I have tried every combination b...
Hi there all,I have issue with my asus maximus v gene. just got the mobo 4 days ago. I am running intel i5 3570k, seasonic 750 m12II And a sphire 7850oc. There is light when power on the main psu but cant get it to start.Apparently remove all the pow...
Hello All!So i'm getting this problem with my M4E-Z... in the last few days i have had the top USB 3.0 ports die on the rear I/O panel die... meaning they are not functioning temporarily until i execute the following procedure. First I uninstall the ...
Dear brothers and sisters,I am a proud owner of rampage 3 black edition. im looking for rams. should i go for ddr3 triple channel or quad channel? thinking of corsair dominator gt. any ideas sifus?
