Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Need help PLEASE

I am having a lot of problems with my VIdeo cards. I am sure that 1 if not both are possibly bad. I think I have figures out a way to boot from the second card without having to remove a card which would mean I would have to drian that loop of the ...

10459
rnealj62 by Level 7
  • 6646 Views
  • 10 replies
  • 0 kudos

Any issues with single graphics in second pcie on MVE?

Hi,My previous post was obviously way too long and confused to get any replies. So lets go with the essentials.Both the first pcie slots on the MVE are electrically x16. Would there be any kind of stability/compatibility/performance issues of putting...

Stiffo by Level 7
  • 4048 Views
  • 4 replies
  • 0 kudos

About new 'Fast-Boot' Bioses

These new 'Fast-Boot' Bioses provide Fast boot option to speed up boot times especially at resets.You can adjust post delay time to be longer (if for example you find it hard to enter BIOS)You can disable Fast boot to make it post not as fast during ...

Shamino by Moderator
  • 4636 Views
  • 1 replies
  • 0 kudos

looking to speed up boot times-Maximus IV Extreme/ssd

Hi i was hoping for some help in speeding up my boot times from a complete shutdown. Currently it takes about 30sec or so to get to the point where i can start to click icons/web. I am using an ssd and was hoping for boot times closer to 10sec or ...

BIOS experience share

I feel this deserves a thread, as the experience may vary.I have been testing R4E bios.namely from 1005 to 1305I have found my Vcore requirement to be higher in 1305.I am not very sure is this entirely because of the BIOS, but it did happen on the sa...

Can't hold 4.5ghz at 1.336 anymore

Hi all,I've had a few BSOD today and when doing some intensive applications. So then I decided to run prime 95 and it is giving me 101 error BSOD errors. Could this be degradation as this chip as always needed more voltage that most. Seems stable at ...

Carnaged by Level 8
  • 12743 Views
  • 23 replies
  • 0 kudos

Overclocking when using RAID question

Hi,I have a Rampage IV Extreme motherboard and twin HyperX SSDs in RAID 0.I recently encountered a problem with my PC crashing hence wanted to undo my Overclocking to indentift whether it was an issue with the Overclock (i7 3690x at 4.8GHz).I went in...

Paul123 by Level 7
  • 3035 Views
  • 2 replies
  • 0 kudos