Well to begin, I've been overclocking for quite some time now. So I'm not totally new the the OC scene. My RIG before my current one consisted of a EVGA X58 SLI board with a 920. Now as you all know that didn't have an unlocked processor, so overcloc...
This is my first computer build and when I first boot up, I get no input on the monitor. Instead I get beeping and an error code. I tried replacing the memory and it would still beep. I tried removing the video card and I still get beeping. Specs:i7 ...
Today I have been noticing quite a few issues with my CHV. I am wondering if its dying?1) the CPU FAN does not start right way when the machine boots up it usually takes quite some time to kick in and when Windows is running, you can hear the fan co...
would 2 690 work on this board ??just qurious only.or would it only take one?since 1 690 is sli in it self, could the formula handle quad in 2 lanes?
there is a new bios 1503 has any one tried it yet?
How does the new AMD Llano, A8-3870K in terms of overclocking? And how is that supposedly the strongest board F1A75-v [/ b] Also on this page? Will outline in detail the possibilities and achievements. If you would perhaps be interested to read the ...
I just finished putting my system together all was running great until a added my raid array.I am using a single SSD for the OS which i set up and pre installed windows 7 64bit and all necessary drivers ( Chipset, RSTe 3.2.0.1135) also am running the...
I have the Rampage III Extreme motherboard, and it gives me all the features I need. Recently I was speaking with a friend about my system and while researching the information about my memory I realized that it is currently running at 1333mhz. The r...
I have problem with AI Suite .. AI Suite detect voltage drop .. if i reboot my system via windows , the system won't boot and and cpu led light on, need reboot from reset button to boot my system again . im using bios 1301 . need help to resolve the...
Hey everyone, Im not new to building computers and Overclocking them, but I am new to having a part stop working. This is what happened to me today-Computer stopped running 3.8ghz Stable.-Reset Bios and used Auto-tune in which it couldn't clock beyon...
