Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

P9x79 ws marvell 9128

I have a problem with Marvell 9128.When I UEFI active in the SSD connected to it are not recognizedand pc is posted bios for 5min.UEFI:Marvell: EnabledDrive Expert: NormalWhen SSD is plugged into Marvell 9128.I have a code 62.Seven in 64 Marvell is n...

12294 Image
VARTAXE by Level 7
  • 4044 Views
  • 1 replies
  • 0 kudos

Ramapage 3 extreme overclocking guide ?

hi guys im running a 990x CPU on one of these boardsis there anywhere a guide to overclocking pleasei can increase the multiplier to up the speed, is that it ?any help or advice here would be handy and gratefully received

BUrned chips

Hi,I bought an Asus Crosshair V Formula from Amazon.com, 2-3 months ago.I was out of country and i had the chance of giving it a try for the first time last week.Due to voltage problems, my 2 chips were burned(i think). (sata and sound chips i presum...

abaka by Level 7
  • 4240 Views
  • 1 replies
  • 0 kudos

Compatibility Help: OCZ RevoDrive III (not the X II)

Hey guys, just got a few questions I'm going to be dealing with over this week.So, I'm a total newbie here. And after months of longing for an RoG rig, I finally got most of the functionality that I want the PC to be. I'm still re-using some stuffs f...

Daskful by Level 7
  • 5753 Views
  • 8 replies
  • 0 kudos

Boot mgr is missing on Vertex 4

Recently i did a fresh install of W7 64 Bits on an OCZ Vertex 4 128GB. Unfortunately when booting up the message appears: Reboot and select a proper boot device or insert boot media in selected boot device and press a key. 1: I did all the driver upd...

12253

Asus 3xxx bios issues posted all over the net

Ever since Asus updated there Bios to the 3XXX versions there have been issues posted all over the net. My issue is not being able to resume from S3 Sleep without a reboot. Still no answer from the Bios team. At first i thought it was a simple confl...

Temp sensor bug after sleep

Hi,I've got a R4E with 3930K and a noctua NH-D14. My 3930K is not OCed, it runs stock at 3.8GHz, 1.2 VCore and low VCCSA 1.05 , low mem voltage 1.4V, everything is low to resume (I'm into gaming you know... no real need to OC here...).So yesterday I ...

Yannick by Level 7
  • 3466 Views
  • 4 replies
  • 0 kudos

Asus P9X79 offset and noise issue

Hey guys,First time poster here.I have been going crazy the past month over this issue so i'll start from the top.First, I purchased a P9X79 which had issues with buzzing noises coming from the board whenever I moved my mouse or at certain times when...

TJ88 by Level 7
  • 6813 Views
  • 5 replies
  • 0 kudos