Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

chvf-z and memory

my friend ordered the chvf-z and this memory. will it work ? plus she got the 8350.http://www.newegg.com/Product/Product.aspx?Item=N82E16820226375

Single DIMM Testing - Slot 3/4 200Mhz (DDR400) ??

Is this some feature I didn't know about? Here is the sitch..if I put a stick in slot1 or 2.. I get the correct read.. if it goes in slut 3 or 4 I get a quarter of what I paid for.. I mean it doesn't detect as 800Mhz (DDR1600) but instead as 200Mhz ...

RIVE and the SCSI Problem

HiIam a newby in Forums,My problem is that my single SSD with the RST 11.6.2.1002 is shown as SCSI Device, but thats wrong , in bios i´ve activating the AHCI .Is there any solve for my problem ? Sorry for my englishWindows 7 x64Bios Version 3204

Cant' install Win XP or Win Vista 32bit on Rampage 4E

Hi ROG people, maybe this is a stupid question, but I was surprised that it could not install Win XP sp2 32bit or Win Vista 32bit Bus.N, while Win 7 32bit or Win 8 32bit it is installed without problem, on a WD Velociraptor Sata2 (not Raid), connect...

sandro_c by Level 12
  • 9128 Views
  • 16 replies
  • 0 kudos

Crosshair V Formula-Z w/ crossfire ASUS Matrix?

Has anyone tried to crossfire the ASUS Matrix on this board? It seems like it would be tight but doable. However, I'm concerned about the panel connectors and USB connectors. Anyone that's tried this or can verify one way or the other is much appreci...

Maximus V Extreme No POST, No Display

Hi,I am having an issue with my new build:No display output and Q-code being A2, boot_device_led lit as well as a long beep and four long ones (according to manual - component failure,and yet...). The mobo lights up the bios led when the PSU switch i...

xRTm9 by Level 7
  • 5597 Views
  • 7 replies
  • 0 kudos

Maximus V gene Virtu MVP problems

I am having a issue with my Maximus V Gene1. I enable virtu MVP in the bios(under system agents.)2. I can not post, BUT I can get in bios, and while in the bios it does say the iGPU is enabled and is running at 850mhz. But I can not get past the boot...