Hi guysI have a big problem with this new board.When i push start, the MB stopped at Q-Code 69 and the Q led vga_led always lighting. I tried to put the asus HD 7970 in any PCI EX, but nothing has happened. I removed it...the same, not start.I tested...
helloi am planning to upgrade my videocard but i see that the latest generation video cards run on pci gen 3 and my formula V has pci gen 2.0. will this slow a pci gen 3 video card a lot or ?
For my motherboard SATA drivers, for a non-raid configuration, do I want to install Asmedia or AHCI drivers? Can anyone enlighten me on the difference or application of one versus the other? Much thanks for any help.CPU: AMD FX-8350 Vishera 4.0GHzMB:...
New to the forums and just built my first PC ever! Had a question about being able to use USB power to charge my iPhone/iPad via the USB ports while my computer was off/shutdown but couldn't find a EuP setting anywhere within the BIOS. I'm on BIOS 12...
Hi guysIt randomly shuts down and i can not turn on without turn off and on psu power switch. Temps are okay and psu has no problem i know it. Using 3570k 4.5 ghz +8 gigs of ram + high power 1kw direct 12 psu. the other problem is when i load optimiz...
So I happened to go into my BIOS today to set my memory to 1866 to match its rated speed, and it seems that this speed value is missing from the list of available choices in the latest release. I could swear it was there in the prior release (not 10...
I have a question on if I replace my existing Crosshair V Formula-Z MB with the exact same one will be forced to reinstall everything from scratch? Are there steps I can take to ensure that will not be required? Thanks in advance for any inputs.
Hi guys,Here's my problem.I have the Asus Maximus IV Gene Z, boots up just fine works just fine if i use the onboard HDMI VGA, however if i try and plug any of my screens on the 7850 Graphics Card i have, no image.I've done everything possible to try...
I first attempted to migrate via to Win 8 64 via full install using an Intel SSD drive. I was experiencing a large number of instability issues. So I called ASUS Tech support a number of times and got some great help from a number of different ones....
Hi Guys,I recently RMA'd my Rampage 4 extreme motherboard due to bad USB ports. Last Friday evening I received my RMA'd motherboard back. My motherboard no longer has the threaded holes around the CPU to insert the screws to hold a mounting bracket f...
